IRIXNetwork


  1. IRIX Network Forums
  2. SGI/MIPS
  3. Hardware/Triage/Repair

Wacom Cintiq 18sx and SGI Octane
#1
Wacom Cintiq 18sx and SGI Octane
Hi guys, I'm trying to get a video signal on my wacom cintiq 18sx connected to an Ocane 1 but no luck so far. I've tried a dVI-I cable that supports digital and analog signal to connect it to the octane 1 via a dvi to 13w3 adaptor.

No signal and it gives a message saying "Cable Disconnected going to power save mode".

I have to mention that I am getting a signal on my Tezro though just to confirm that the cintiq is functional.

Anyone an idea what I might be missing?

Thanks in advance.
tamtamx
O2

Trade Count: (0)
Posts: 17
Threads: 3
Joined: Sep 2018
Find Reply
02-16-2020, 11:37 PM
#2
RE: Wacom Cintiq 18sx and SGI Octane
Sync on green, probably
I'm the system admin of this site. Private security technician, licensed locksmith, hack of a c developer and vintage computer enthusiast. 

https://contrib.irixnet.org/raion/ -- contributions and pieces that I'm working on currently. 

https://codeberg.org/SolusRaion -- Code repos I control

Technical problems should be sent my way.
Raion
Chief IRIX Officer

Trade Count: (9)
Posts: 4,240
Threads: 533
Joined: Nov 2017
Location: Eastern Virginia
Website Find Reply
02-17-2020, 01:56 AM
#3
RE: Wacom Cintiq 18sx and SGI Octane
You think? I made sure it's a wacom cintiq model that came out around the time as the octane roughly 1999-2000.
tamtamx
O2

Trade Count: (0)
Posts: 17
Threads: 3
Joined: Sep 2018
Find Reply
02-17-2020, 08:28 AM
#4
RE: Wacom Cintiq 18sx and SGI Octane
18sx owner here. Can confirm mine works on my O2, so this should take SoG. Could be the 13w3 to DVI. The O2 uses VGA, so for an Octane I think the 13w3 has to be stepped to VGA then to DVI?
-=JackNet=-

Your typical IT river otter with glasses.
Doing SGI stuff since the last time we all partied like it's 1999.

O2 400MHz R12k, 640MB RAM, 150GB HDD, 6.5.30, A/V
[Image: 6LjkurW.png] Wacom Cintiq 18SX (PL-800-02)
JackNet
O2

Trade Count: (0)
Posts: 35
Threads: 8
Joined: May 2019
Location: Florida, USA
Website Find Reply
02-17-2020, 01:34 PM
#5
RE: Wacom Cintiq 18sx and SGI Octane
(02-17-2020, 01:56 AM)Raion Wrote:  Sync on green, probably

(02-17-2020, 01:34 PM)JackNet Wrote:  18sx owner here. Can confirm mine works on my O2, so this should take SoG. Could be the 13w3 to DVI. The O2 uses VGA, so for an Octane I think the 13w3 has to be stepped to VGA then to DVI?

Yeah thats what I'm doing basically. I have a vga to 13w3 adapter and then I tried either a vga to dvi but there is already also a vga cable attached to the cintiq which I tried but same issue. I seem to be missing something.
tamtamx
O2

Trade Count: (0)
Posts: 17
Threads: 3
Joined: Sep 2018
Find Reply
02-17-2020, 05:00 PM
« Next Oldest | Next Newest »


Forum Jump:


Users browsing this thread: 1 Guest(s)