[SuicideK]

Hi , been a lurker for awhile but never really post anything. I acquired an Indy yesterday with the caveat of it not booting.  When I plug it in and attempt power on the led flickers red and I hear clicking from the PSU. Seems pretty apparent to me the PSU is dead ( wall oulet and cable power other machines without issue ) before I went down the expensive route of sourcing an Indy lower supply I thought I would ask other Indy owners their thoughts and any issues I should be aware with PSU swapping.

-SK

[uunix]

Obviously ensure everything is plugged in internally, but I would leave it plugged into the mains and attempt to fire it up every few hours.. What make of PSU is it?

[dexter1]

It could be the mainboard itself that has blown a capacitor. Check the image from Gearhard Lenerz' website, archived here

If you take a look at the photo and check out the three yellow capacitors (c15 c16 c17) in a row, just left of the leftmost red component, you see that C16 looks funny. That capacitor sometimes blows up and leaves magic smoke.

Make sure you have a look at your mainboard on that spot.

[SuicideK]

Thanks all , I took it apart over the weekend and did not see any apparent mobile damage or blown caps. It has the Nidec power supply in it , and I guess was running 24/7 at one point ( it was a firewall for an animation studio) attempting to source a new PSU for it. 

 -SK

[SuicideK]

I wanted to close this out for anyone else to reference in the future. The issue was indeed a dead power supply. I purchased a Sony supply and it booted right up.

-SK

[Raion]

Keep all of your old PSUs.

it's also noted that Sony PSUs are **not** immune to failure. They can blow mosfets and other components still.