IRIXNetwork


  1. IRIX Network Forums
  2. SGI/MIPS
  3. Hardware/Triage/Repair

USB pci card on Octane 2
#1
USB pci card on Octane 2
Hi guys, did you think is possible install and make work this USB adapter: https://www.3d-systems.co.uk/product/sgi...d-9210286/ on an Octane by using an XTalk adapter?
Thanks for any help.
[Image: Octane2c.png] R14000 600MHz, 4GB Ram, V12 w DCD, 300GB 15K HDD
indrema
O2

Trade Count: (0)
Posts: 49
Threads: 13
Joined: Sep 2018
Find Reply
11-28-2018, 03:17 PM
#2
RE: USB pci card on Octane 2
I could be mistaken, but i seem to recall these only work on fuels/tezros/350's
gijoe77
Tezro

Trade Count: (1)
Posts: 644
Threads: 34
Joined: Jun 2018
Find Reply
11-28-2018, 04:17 PM
#3
RE: USB pci card on Octane 2
This is what are write on vendor site too, but maybe someone have try that and can share his experience.
[Image: Octane2c.png] R14000 600MHz, 4GB Ram, V12 w DCD, 300GB 15K HDD
indrema
O2

Trade Count: (0)
Posts: 49
Threads: 13
Joined: Sep 2018
Find Reply
11-28-2018, 11:44 PM
#4
RE: USB pci card on Octane 2
I looked into this myself and concluded USB was not possible with an Octane. If there is a way, I’m not aware of a way to get it to work.
Octane 2x600mhz R14000 Octane2 dual head V12 / V10, 7 gig Ram
Octane 2x250mhz R10000 2gig ram, MXE, Digital Video, MSCSI, Jaleo
1600SW O2 400mhz R12000 O2, 1gig Ram AV1  - 250gig Media' raid
Indy 180mhz R5000 Indy XZ 256mb ram
Indigo2 200mhz R4400 Extreme…….Under Construction
Dell T7600 dual 3.5 Xeon, 512 gb ram, Quadro K6000 + Tesla k20 - DaVinci Resolve Studio Editing
Dell T5500 dual 3.2 Xeon, 72gb ram, Quadro 6000 + Tesla C2075 - DaVinci Resolve Studio Cutting
Intel i7-990x 3.46GHz Extreme 6 core / Quadro 5000 & 2 x Tesla C2075 / 24gig Ram inside an SGI 320vw case
bjames
Tezro

Trade Count: (0)
Posts: 384
Threads: 109
Joined: Aug 2018
Find Reply
11-29-2018, 04:53 AM
#5
RE: USB pci card on Octane 2
Thanks to anyone for your direct feedback.
[Image: Octane2c.png] R14000 600MHz, 4GB Ram, V12 w DCD, 300GB 15K HDD
indrema
O2

Trade Count: (0)
Posts: 49
Threads: 13
Joined: Sep 2018
Find Reply
11-29-2018, 05:57 PM
« Next Oldest | Next Newest »


Forum Jump:


Users browsing this thread: 1 Guest(s)