[eye51]

(updated price)
Good looking O2100 with SSI graphics, so replaced the IO6 to enable the graphics 'hack'.
Original IO6 also available

Bought directly from SGI NL when they stopped having an office in NL. So, the system has never been in a production environment.

13w3 -> VGA adapter

asking 1750 OBO
local pickup in NL


# hinv -vm
Location: /hw/module/1/slot/n1/node
        MODULEID Board: barcode K0030183  part              rev
      8P12_MPLN Board: barcode MFM464    part 030-1535-001 rev  C
            IP31 Board: barcode GCD653    part 030-1255-003 rev  B
        IP31PIMM Board: barcode HJS719    part 030-1313-002 rev  A
Location: /hw/module/1/slot/n2/node
            IP31 Board: barcode DGJ146    part 030-1255-003 rev  A
        IP31PIMM Board: barcode GCF362    part 030-1313-002 rev  A
Location: /hw/module/1/slot/n3/node
        IP31PIMM Board: barcode GEZ373    part 030-1313-002 rev  A
            IP31 Board: barcode DEC832    part 030-1255-003 rev  A
Location: /hw/module/1/slot/n4/node
            IP31 Board: barcode GCD661    part 030-1255-003 rev  B
        IP31PIMM Board: barcode HJS697    part 030-1313-002 rev  A
Location: /hw/module/1/slot/r1/router
      ROUTER_IR1 Board: barcode HKM257    part 030-0841-003 rev  B
Location: /hw/module/1/slot/r2/router
      ROUTER_IR1 Board: barcode HKJ181    part 030-0841-003 rev  B
Location: /hw/module/1/slot/io4/mscsi
          MSCSI Board: barcode KCT841    part 030-1243-001 rev  M
Location: /hw/module/1/slot/io12/mgras
          MOT20 Board: barcode KFY600    part 030-1240-003 rev  G
Location: /hw/module/1/slot/io1/baseio
          BASEIO Board: barcode GAM110    part 030-0734-002 rev  K
            MIO Board: barcode FZY488    part 030-0880-003 rev  F
8 250 MHZ IP27 Processors
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 3.4
CPU 0 at Module 1/Slot 1/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
CPU 1 at Module 1/Slot 1/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
CPU 2 at Module 1/Slot 2/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
CPU 3 at Module 1/Slot 2/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
CPU 4 at Module 1/Slot 3/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
CPU 5 at Module 1/Slot 3/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
CPU 6 at Module 1/Slot 4/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
CPU 7 at Module 1/Slot 4/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled)
  Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz  Tap 0x9
Main memory size: 8192 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 1/Slot 1: 2048 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
  Bank 1 contains 256 MB (Standard) DIMMS (enabled)
  Bank 2 contains 256 MB (Standard) DIMMS (enabled)
  Bank 3 contains 256 MB (Standard) DIMMS (enabled)
  Bank 4 contains 256 MB (Standard) DIMMS (enabled)
  Bank 5 contains 256 MB (Standard) DIMMS (enabled)
  Bank 6 contains 256 MB (Standard) DIMMS (enabled)
  Bank 7 contains 256 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 2: 2048 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
  Bank 1 contains 256 MB (Standard) DIMMS (enabled)
  Bank 2 contains 256 MB (Standard) DIMMS (enabled)
  Bank 3 contains 256 MB (Standard) DIMMS (enabled)
  Bank 4 contains 256 MB (Standard) DIMMS (enabled)
  Bank 5 contains 256 MB (Standard) DIMMS (enabled)
  Bank 6 contains 256 MB (Standard) DIMMS (enabled)
  Bank 7 contains 256 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 3: 2048 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
  Bank 1 contains 256 MB (Standard) DIMMS (enabled)
  Bank 2 contains 256 MB (Standard) DIMMS (enabled)
  Bank 3 contains 256 MB (Standard) DIMMS (enabled)
  Bank 4 contains 256 MB (Standard) DIMMS (enabled)
  Bank 5 contains 256 MB (Standard) DIMMS (enabled)
  Bank 6 contains 256 MB (Standard) DIMMS (enabled)
  Bank 7 contains 256 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 4: 2048 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
  Bank 1 contains 256 MB (Standard) DIMMS (enabled)
  Bank 2 contains 256 MB (Standard) DIMMS (enabled)
  Bank 3 contains 256 MB (Standard) DIMMS (enabled)
  Bank 4 contains 256 MB (Standard) DIMMS (enabled)
  Bank 5 contains 256 MB (Standard) DIMMS (enabled)
  Bank 6 contains 256 MB (Standard) DIMMS (enabled)
  Bank 7 contains 256 MB (Standard) DIMMS (enabled)
ROUTER in Module 1/Slot 2: Revision 2: Active Ports [3,4,5,6] (enabled)
ROUTER in Module 1/Slot 4: Revision 2: Active Ports [3,4,5,6] (enabled)
Integral SCSI controller 2: Version QL1040B (rev. 2), differential
Integral SCSI controller 3: Version QL1040B (rev. 2), differential
Integral SCSI controller 4: Version QL1040B (rev. 2), differential
Integral SCSI controller 5: Version QL1040B (rev. 2), differential
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: ESSI
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin MSCSI board, module 1 slot 4: Revision 4
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3
Origin BASEIO board, module 1 slot 1: Revision 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 3: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 4: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.156
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n3: Revision 6.156
IP27prom in Module 1/Slot n4: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.156