IRIXNetwork


  1. IRIX Network Forums
  2. SGI/MIPS
  3. IRIX/Software

Flame 7.0 install - changed my irix environment
#1
Flame 7.0 install - changed my irix environment
Installing flame 7.0 went fine without a hitch.  However it totally messed up my irix root, user account environments.  What I mean is the irix 6.5.28 now looks like either a extremely light irix installation or irix 5.3 or earlier.  The tool chest has been stripped down to the bare minimum and all my desktop icons disappeared.  

The display properties application from the tool chest even disappeared.

Any way I can restore irix desktop to my previous settings?
Octane 2x600mhz R14000 Octane2 dual head V12 / V10, 7 gig Ram
Octane 2x250mhz R10000 2gig ram, MXE, Digital Video, MSCSI, Jaleo
1600SW O2 400mhz R12000 O2, 1gig Ram AV1  - 250gig Media' raid
Indy 180mhz R5000 Indy XZ 256mb ram
Indigo2 200mhz R4400 Extreme…….Under Construction
Dell T7600 dual 3.5 Xeon, 512 gb ram, Quadro K6000 + Tesla k20 - DaVinci Resolve Studio Editing
Dell T5500 dual 3.2 Xeon, 72gb ram, Quadro 6000 + Tesla C2075 - DaVinci Resolve Studio Cutting
Intel i7-990x 3.46GHz Extreme 6 core / Quadro 5000 & 2 x Tesla C2075 / 24gig Ram inside an SGI 320vw case
bjames
Tezro

Trade Count: (0)
Posts: 384
Threads: 109
Joined: Aug 2018
Find Reply
09-04-2018, 12:32 AM
#2
RE: Flame 7.0 install - changed my irix environment
Type the following commands in the console to get your root back to normal:

chkconfig desktop on
chkconfig mediad on
chkconfig autofs on
chkconfig soundscheme on
YouTube
Photo Gallery
(This post was last modified: 09-04-2018, 03:26 AM by Irinikus.)
 Irinikus
Hardware Connoisseur

Trade Count: (0)
Posts: 3,475
Threads: 319
Joined: Dec 2017
Location: South Africa
Website Find Reply
09-04-2018, 03:25 AM
#3
RE: Flame 7.0 install - changed my irix environment
Fixed.. Thanks a lot!
Octane 2x600mhz R14000 Octane2 dual head V12 / V10, 7 gig Ram
Octane 2x250mhz R10000 2gig ram, MXE, Digital Video, MSCSI, Jaleo
1600SW O2 400mhz R12000 O2, 1gig Ram AV1  - 250gig Media' raid
Indy 180mhz R5000 Indy XZ 256mb ram
Indigo2 200mhz R4400 Extreme…….Under Construction
Dell T7600 dual 3.5 Xeon, 512 gb ram, Quadro K6000 + Tesla k20 - DaVinci Resolve Studio Editing
Dell T5500 dual 3.2 Xeon, 72gb ram, Quadro 6000 + Tesla C2075 - DaVinci Resolve Studio Cutting
Intel i7-990x 3.46GHz Extreme 6 core / Quadro 5000 & 2 x Tesla C2075 / 24gig Ram inside an SGI 320vw case
bjames
Tezro

Trade Count: (0)
Posts: 384
Threads: 109
Joined: Aug 2018
Find Reply
09-04-2018, 06:13 PM
#4
RE: Flame 7.0 install - changed my irix environment
(09-04-2018, 03:25 AM)Irinikus Wrote:  Type the following commands in the console to get your root back to normal:

chkconfig desktop on
chkconfig mediad on
chkconfig autofs on
chkconfig soundscheme on

I Wrote it in red in my list of things I've to know about installing Flame !
———————————————————————————————
Nevermind if SGI is dead ... In SGI I trust (^_^!)
Octane  1x400Mhz / 2Go Ram / V8 / Irix 6.5.26
def13
Octane

Trade Count: (0)
Posts: 103
Threads: 21
Joined: Jun 2018
Location: Marseille - France
Find Reply
02-12-2019, 04:11 PM
#5
RE: Flame 7.0 install - changed my irix environment
I’ve installed flame so many times trying to get the stone drive to work with no success.  I now have the env variables ingrained into my head ..
Octane 2x600mhz R14000 Octane2 dual head V12 / V10, 7 gig Ram
Octane 2x250mhz R10000 2gig ram, MXE, Digital Video, MSCSI, Jaleo
1600SW O2 400mhz R12000 O2, 1gig Ram AV1  - 250gig Media' raid
Indy 180mhz R5000 Indy XZ 256mb ram
Indigo2 200mhz R4400 Extreme…….Under Construction
Dell T7600 dual 3.5 Xeon, 512 gb ram, Quadro K6000 + Tesla k20 - DaVinci Resolve Studio Editing
Dell T5500 dual 3.2 Xeon, 72gb ram, Quadro 6000 + Tesla C2075 - DaVinci Resolve Studio Cutting
Intel i7-990x 3.46GHz Extreme 6 core / Quadro 5000 & 2 x Tesla C2075 / 24gig Ram inside an SGI 320vw case
bjames
Tezro

Trade Count: (0)
Posts: 384
Threads: 109
Joined: Aug 2018
Find Reply
02-17-2019, 03:37 AM
« Next Oldest | Next Newest »


Forum Jump:


Users browsing this thread: 1 Guest(s)