Your hinv's (Post them here:)
#39
RE: Your hinv's (Post them here:)
Fuel


Code:
Location: /hw/module/001c01/node
            IP34 Board: barcode NAS621     part 030-1707-003 rev -M
Location: /hw/module/001c01/node/cpubus/0
        IP34PIMM Board: barcode MSY420     part 030-1891-001 rev -D
Location: /hw/module/001c01/Ibrick/xtalk/13
      ODY128B1_2 Board: barcode NWM092     part 030-1884-005 rev -B
Location: /hw/module/001c01/Ibrick/xtalk/14
            IP34 Board: barcode NAS621     part 030-1707-003 rev -M
Location: /hw/module/001c01/Ibrick/xtalk/15
            IP34 Board: barcode NAS621     part 030-1707-003 rev -M
1 700 MHZ IP35 Processor
CPU: MIPS R16000 Processor Chip Revision: 2.1
FPU: MIPS R16010 Floating Point Chip Revision: 2.1
CPU 0 at Module 001c01/Slot 0/Slice A: 700 Mhz MIPS R16000 Processor Chip (enabled)
  Processor revision: 2.1. Scache: Size 4 MB Speed 350 Mhz  Tap 0xa
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 4096 MB (enabled)
  Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
  Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 6: Version IEEE1394 SBP2
Integral SCSI controller 7: Version LS1030, low voltage differential
Integral SCSI controller 8: Version LS1030, low voltage differential
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, single ended
  CDROM: unit 4 on SCSI controller 1
  Disk drive / removable media: unit 6 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V12
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Iris Audio Processor: version EMU revision A3, number 1
  PCI Adapter ID (vendor 0x1033, device 0x0035) PCI slot 1
  PCI Adapter ID (vendor 0x1033, device 0x0035) PCI slot 1
  PCI Adapter ID (vendor 0x1033, device 0x00e0) PCI slot 1
  PCI Adapter ID (vendor 0x1000, device 0x0030) PCI slot 2
  PCI Adapter ID (vendor 0x1000, device 0x0030) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x1102, device 0x0004) PCI slot 2
  PCI Adapter ID (vendor 0x1102, device 0x7003) PCI slot 2
  PCI Adapter ID (vendor 0x1102, device 0x4001) PCI slot 2
  PCI Adapter ID (vendor 0x104c, device 0x8024) PCI slot 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x1045, device 0xc861) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
DMediaPro DM10 FW option: unit 0, revision 1.1.0
USB controller: type OHCI
USB controller: type OHCI
USB controller: type OHCI
ajw99uk
Ex-SGI owner

Trade Count: (0)
Posts: 8
Threads: 0
Joined: Mar 2019
Location: West Yorkshire, UK
Find Reply
03-23-2019, 06:52 PM


Messages In This Thread

Forum Jump:


Users browsing this thread: 1 Guest(s)