IRIX Network Forums
Your hinv's (Post them here:) - Printable Version

+- IRIX Network Forums (//forums.irixnet.org)
+-- Forum: SGI/MIPS (//forums.irixnet.org/forum-3.html)
+--- Forum: SGI Discussion (//forums.irixnet.org/forum-10.html)
+--- Thread: Your hinv's (Post them here:) (/thread-54.html)

Pages: 1 2 3 4

Your hinv's (Post them here:) - Irinikus - 05-23-2018

Here's my Tezro's hinv:


[Image: 4Mzjdar.jpg]

[Image: 8abofXQ.jpg]

[Image: 2k4TdKV.jpg]

[Image: Jx2GCKu.jpg]

Re: Your hinv's (Post them here:) - jirka - 05-28-2018

My O2:
Code:
<i>
</i>CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
1 250 MHZ IP32 Processor
Main memory size: 1024 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte on Processor 0
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
FLASH PROM version 4.18
Integral SCSI controller 0: Version ADAPTEC 7880
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
  CDROM: unit 4 on SCSI controller 0
Integral SCSI controller 1: Version ADAPTEC 7880
On-board serial ports: tty1
On-board serial ports: tty2
On-board EPP/ECP parallel port
CRM graphics installed
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A3 revision 0
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 1
  PCI Adapter ID (vendor 0x9004, device 0x8078) PCI slot 2
Video: MVP unit 0 version 1.4
AV: AV1 Card version 1, Camera not connected.
Vice: TRE
1600SW Flat Panel adapter board and display.


Re: Your hinv's (Post them here:) - Irinikus - 06-01-2018

My O2:


[Image: TWsO7B9.jpg]

[Image: 8Lgp6wN.jpg]

[Image: 45Mxt2K.jpg]

Re: Your hinv's (Post them here:) - Irinikus - 06-01-2018

My Visual Workstation 320:


[Image: 8kX7NBu.jpg]

[Image: l6IqJYw.jpg]

[Image: R4mJzsl.jpg]

[Image: wE9Gc2X.jpg]

Re: Your hinv's (Post them here:) - Irinikus - 06-01-2018

My Indy R4000:


[Image: z2pENSS.jpg]

[Image: Mzx6KkZ.jpgg]

[Image: LYl9bGe.jpg]

Re: Your hinv's (Post them here:) - Irinikus - 06-01-2018

My Indy R5000:


[Image: EmWcWVH.jpg]

[Image: DTQuviN.jpg]

[Image: svJ2L07.jpg]

Re: Your hinv's (Post them here:) - Irinikus - 06-01-2018

My Indigo2:


[Image: zbOrjkO.jpg]

[Image: fwpuu1n.jpg]

[Image: gWwWmfS.jpg]

Re: Your hinv's (Post them here:) - Irinikus - 06-01-2018

My Octane2 (sleeper):


[Image: Q0R4rJk.jpg]

[Image: f27NiP7.jpg]

[Image: QEs0pFT.jpg]

Re: Your hinv's (Post them here:) - Irinikus - 06-01-2018

My Onyx2:


[Image: VWVLliz.jpg]
[Image: 5Cy83fs.jpg]
[Image: UE9zGNr.jpg]
[Image: JVb83Nt.jpg]

Re: Your hinv's (Post them here:) - Jacques - 06-02-2018

Posting from my Octane 1

Code:
Eve 3% hinv -vm
Location: /hw/node
      PM10400MHZ Board: barcode LDW658     part 030-1475-002 rev  B
Location: /hw/node/xtalk/15
            IP30 Board: barcode JZJ388     part 030-1467-001 rev  D
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode 57086C     part 030-0891-003 rev  E
    PWR.SPPLY.ER Board: barcode AAE9160111 part 060-0035-001 rev  C
Location: /hw/node/xtalk/11
          ODY128 Board: barcode BVA807     part 030-1404-003 rev  A
1 400 MHZ IP30 Processor
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 1024 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V8
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3

Code:
<i>
</i>
Eve 4% /usr/gfx/gfxinfo
Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1920x1200
        BUZZ version A.1
        PB&J version 1
        128MB memory
                Banks: 4, CAS latency: 3
         Monitor 0 type: DEL -24554
        Channel 0:
         Origin = (0,0)
         Video Output: 1920 pixels, 1200 lines, 60.02Hz (1920x1200_60)