Your hinv's (Post them here:)
#35
RE: Your hinv's (Post them here:)
I upgraded my Onyx2 to Infinite Reality 4 Smile

I think the deskside Onyx2 is one of the best systems to have: you can play with Infinite Reality without having to deal with the space, noise and power requirements of a tall rack.

This is about as far as you can take the Onyx2: R14K CPUs, 8GB RAM, IR4 with dual RM11's. It's got FC, dual gigabit ethernet, and a full set of DMediaPro HD video I/O hardware: a DM2 board, a DG5-TVO with a pair of DVI ports for HD-GVO applications using an external DMediaPro VBOB (with a DM5, the same vbob as used by the Octane2/Tezro).

I intend to run Discreet Inferno on it.

hinv

Code:
lego 1# hinv -mv
Location: /hw/module/1/slot/n2/node
           IP31 Board: barcode KRN340     part 030-1523-001 rev  C
   IP31PIMMR14K Board: barcode MJJ973     part 030-1547-002 rev  E
Location: /hw/module/1/slot/n1/node
       MODULEID Board: barcode K0027878   part              rev  
   IP31PIMMR14K Board: barcode MJW458     part 030-1547-002 rev  E
           IP31 Board: barcode MHZ719     part 030-1523-001 rev  C
     4P1G5_MPLN Board: barcode KVJ884     part 030-1066-002 rev  L
Location: /hw/module/1/slot/io4/kona
         GE16-4 Board: barcode LZM160     part 030-1398-001 rev  E
Location: /hw/module/1/slot/io6/xtalk_pci
      XTALK_PCI Board: barcode MMB502     part 030-1275-004 rev  A
Location: /hw/module/1/slot/io1/baseio
         BASEIO Board: barcode KWA975     part 030-0734-003 rev  A
            MIO Board: barcode KWG679     part 030-0880-003 rev  G
Location: /hw/module/1/slot/io5/xtalk_pci
      XTALK_PCI Board: barcode MFM649     part 030-1275-004 rev  A
Location: /hw/module/1/slot/io3/xt_digvid
      XT-DIGVID Board: barcode MGY958     part 030-1653-002 rev  G
4 500 MHZ IP27 Processors
CPU: MIPS R14000 Processor Chip Revision: 1.4
FPU: MIPS R14010 Floating Point Chip Revision: 1.4
CPU 0 at Module 1/Slot 2/Slice A: 500 Mhz MIPS R14000 Processor Chip (enabled)
 Processor revision: 1.4. Scache: Size 8 MB Speed 250 Mhz  Tap 0xa
CPU 1 at Module 1/Slot 2/Slice B: 500 Mhz MIPS R14000 Processor Chip (enabled)
 Processor revision: 1.4. Scache: Size 8 MB Speed 250 Mhz  Tap 0xa
CPU 2 at Module 1/Slot 1/Slice A: 500 Mhz MIPS R14000 Processor Chip (enabled)
 Processor revision: 1.4. Scache: Size 8 MB Speed 250 Mhz  Tap 0xa
CPU 3 at Module 1/Slot 1/Slice B: 500 Mhz MIPS R14000 Processor Chip (enabled)
 Processor revision: 1.4. Scache: Size 8 MB Speed 250 Mhz  Tap 0xa
Main memory size: 8192 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 1/Slot 82: 4096 MB (enabled)
 Bank 0 contains 512 MB (Standard) DIMMS (enabled)
 Bank 1 contains 512 MB (Standard) DIMMS (enabled)
 Bank 2 contains 512 MB (Standard) DIMMS (enabled)
 Bank 3 contains 512 MB (Standard) DIMMS (enabled)
 Bank 4 contains 512 MB (Standard) DIMMS (enabled)
 Bank 5 contains 512 MB (Standard) DIMMS (enabled)
 Bank 6 contains 512 MB (Standard) DIMMS (enabled)
 Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 81: 4096 MB (enabled)
 Bank 0 contains 512 MB (Standard) DIMMS (enabled)
 Bank 1 contains 512 MB (Standard) DIMMS (enabled)
 Bank 2 contains 512 MB (Standard) DIMMS (enabled)
 Bank 3 contains 512 MB (Standard) DIMMS (enabled)
 Bank 4 contains 512 MB (Standard) DIMMS (enabled)
 Bank 5 contains 512 MB (Standard) DIMMS (enabled)
 Bank 6 contains 512 MB (Standard) DIMMS (enabled)
 Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
 Disk drive: unit 1 on SCSI controller 0 (unit 1)
 CDROM: unit 7 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: InfiniteReality4
Gigabit Ethernet: tg1, module 1, XIO slot io5 port 0
Gigabit Ethernet: tg2, module 1, XIO slot io5 port 1
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin BASEIO board, module 1 slot 1: Revision 4
 PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
 PCI Adapter ID (vendor 0x1077, device 0x2312) PCI slot 1
 PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 1
 PCI Adapter ID (vendor 0x14e4, device 0x1648) PCI slot 1
 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
 PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
XT-DIGVID Multi-standard Digital Video: controller 0, unit 0, version 0x0
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 2: Revision 6 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 1: Revision 6 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n1: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.156

gfxinfo
Code:
lego 2# /usr/gfx/gfxinfo -v
Graphics board 0 is "KONAL" graphics.
       Managed (":0.0") 1920x1200
       Display has 2 channels
       4 GEs (of 4), occmask = 0x0f
       4MB external BEF ram, 32bit path
       2 RM11 boards (of 2) 1/1/0/0
       Texture Memory: 1024MB/1024MB/-/-
       Extra-Large pixel depth
       32K cmap
       TVO option detected
       brd: 80f61806 3061c06/3061c04/-/- f9191002
        ge: 0 14832057 24731057 14231057
       rm0: 05032057 35431057
             4631057 3/3/3/3
             4d31057 3/3/3/3/3/3/3/3
             4938057 5/5/5/5/5/5/5/5/5/5
       rm1: 05032057 35431057
             4631057 3/3/3/3
             4d31057 3/3/3/3/3/3/3/3
             4938057 5/5/5/5/5/5/5/5/5/5
        dg: 05532057
             5838057 1/1/1/1
             5631057 1/1
       GE:   NIC #:      0000.0052.2989 (family: 0b)
             Serial #:   LZM160
             Part #:     030-1398-001
       KT:   No NIC serial number available.
       RM0:  NIC #:      0000.006b.c9d4 (family: 0b)
             Serial #:   MRK516
             Part #:     030-1651-004
       TM0:  NIC #:      0000.006b.e2c4 (family: 0b)
             Serial #:   MNZ477
             Part #:     030-1650-003
       RM1:  NIC #:      0000.006c.60b7 (family: 0b)
             Serial #:   MTJ639
             Part #:     030-1651-004
       TM1:  NIC #:      0000.006c.5d89 (family: 0b)
             Serial #:   MTJ779
             Part #:     030-1650-004
       RM2:  No NIC serial number available.
       TM2:  No NIC serial number available.
       RM3:  No NIC serial number available.
       TM3:  No NIC serial number available.
       BP:   No NIC serial number available.
       DG:   NIC #:      0000.0083.6fe7 (family: 0b)
             Serial #:   NGS389
             Part #:     030-1242-001
       DGOPT:NIC #:      0000.0083.cae1 (family: 0b)
             Serial #:   NFW909
             Part #:     030-1511-004
       Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
       Channel 0:
        Origin = (0,0)
        Video Output: 1920 pixels, 1200 lines, 66.00Hz (1920x1200_66.vfo)
        Video Format Flags:  (none)
        Sync Output(s):
         Composite sync on Green
         Composite TTL sync on Aux 0
        Using Gamma Map
(This post was last modified: 02-06-2019, 10:09 PM by jan-jaap.)
jan-jaap
SGI Collector

Trade Count: (0)
Posts: 1,049
Threads: 37
Joined: Jun 2018
Location: Netherlands
Website Find Reply
02-06-2019, 10:07 PM


Messages In This Thread

Forum Jump:


Users browsing this thread: 1 Guest(s)