[callahan]

I've got a new-to-me Indy that I want to put a new SCSI2SD v6 into. The machine had a IBM drive prior, which passed power-on diagnostics but would not load the OS (it had Gentoo linux on it, fwiw). 

Now, with the SCSI2SD v6 I get a diagnostic error "Device 1 failed DMA test." I ensured the latest firmware is on the device (and tried the previous 4 versions for good measure). I do not have termination enabled (using what appears to be an original cable with a terminator) and otherwise have default settings (but have tried toggling just about everything).

For what it's worth, even with the error I was able to partition the drive using fx (via bootp), but the network install promptly failed due to a system disk issue. 

Does anyone have any tips for troubleshooting this error? SCSI2SD v6's are known to work with the Indy as well as previous versions.

Any help/tips would be most appreciated!