[weblacky]

Normally this means you selected a minimal install, assuming you inserted all the correct install files. You have to select a "install standard", minimal installs leave you basically totally naked but saving a ton of space because you only wanted to run one application and don't need all the extra stuff. If you have the space a minimal install basically traps you into nothingness...

Go through it all again but this time keep special attention to the "install standard" directive.  Be aware you should use a blank drive to reinstall or you risk merging installations between old and new. Assuming you're using an SD adapter you can just create a new image. If you're using a real hard drive you need to write zeros to the drive in FX to clear it before you re-initialize a new SGI disk label.

Pick your poison on erasing here: https://forums.irixnet.org/thread-3721.html

Once you've opened all the distribution files you can then use the install guide to continue: http://www.sgidepot.co.uk/6.5inst.html

So I setup a raspberry pi with the reanimator software (lite) and downloaded irix 6.5, 6.5.22, and 6.5.30 disks using the menu.

I get through the install ok, but the O2 only boots to a really basic looking IRIX login screen.

When I login with root and no password, I get an incomplete desktop with a single shell but no windowing widgets.  I tried installing 6.5.22 first and then 6.5.30 with same results.

Can anyone confirm reanimator as a good tool I can use to install IRIX on this machine?


Thanks,
Bart