[weblacky]

If you're looking for Irix 6.2 and before go up a level to drivers (you'll find Wacom 3.2 drivers) and they'll be categorized by operating system first. Also it's possible that you may need the nekochan\OSS Bzip2 and GZIP to untar them...perhaps the Irix-specific utils weren't used to create the archives...I'll check on modern utils.

UPDATE: Yeah 4.7.2 untars/ungzips just fine on modern utilities. That means it was archived with a more recent utility than what you have on your station.  Download it on your PC or Mac and use modern utilities to open it then transfer the raw files using FTP to your Irix station and install them.

But that's something you unfortunately have to deal with. All most of the time the compression and archives were done entirely with the newer open source software that the group uses. So if you're on 6.2 specifically I don't know what to say. If you're on 6.5 ask Raion where to start, but you need to load all new tar and zip and all the basic bash and all that stuff first so that the utilities are recent enough to unpack the software. Unless it's in a tardist it's not going to be directly SGI utils friendly.

Shoot, what am I not seeing?

Intuos_4.2.0_Upgrade-for-6.x.tar.bz2              17-Mar-2002 22:20            17888537
README                                            13-May-2008 19:54                516
Wacom-2.02-Irix5.2.tar.Z                          13-May-2008 19:54              64567
Wacom-2.02-Irix5.3.tar.Z                          13-May-2008 19:54              65793
Wacom_SGI_4.7.2.tar.gz                            23-Feb-2003 22:48            3264380
Wacom_SGI_4.8.0.tar.gz                            18-Mar-2005 06:28            10096910
cp-4.2.0_for_irix-6.3.tar.gz                      23-Feb-2008 21:09              841018
wacom__ttyd1off.txt                                13-Jun-2008 17:59                828

BTW, Wacom_SGI_4.7.2.tar.gz fails to extract. I think that's for 6.5, though, but I gave it a shot.