[jwhat]

Hi Irinikus and Ian,

here is my final update on Quake Benchmarks, having put additional 2 x RM11 into my IR4 chassis (so now running full complement of 4 x RM11 on main pipe):

Q2: 689 frames, 4.2 seconds: 164.9 fps (greater than refresh rate of monitor)
Q3: 1260 frames 21.2 seconds 59.3 fps 10.0/16.9/35.0/2.6 ms

HW config as per prior tests.

Total aside, when I went to boot up machine once I had added extra RM11s, the main chassis keep hanging at l1 boot. This set off a bit of panic on my side, as having got to IR4 nirvana, now the machine was failing... On opening up the chassis I saw I had not updated the DALLAS on this host with the cz7asm replacement. I put in one of these with new battery and machine come good again. No doubt failing DALLAS battery had resulted in corrupted NVRAM which was stopping L1 from starting up correctly. So my Onyx 350 gets to live another day...


Cheers from Oz,


jwhat/John.