Lucy Runs! :)
#31
Re: Lucy Runs! :)
Also check out Dina, it will allow a network install by hosting the VM on a PC or Mac. Although you'll need something that can mount IRIX CDs and read the EFS file system on them. When I set up Dina myself, I used my Indigo2 to read the disks, so I don't have experience of reading them on a PC or Mac.

Root passwords can be removed, but you need either a second SGI, or a second disk with IRIX on it. I'd advise not wiping the HDD if you can in case it has some nice software on it. Better to get a replacement disk, get IRIX onto it somehow, then remove the root password from your current HDD.

The lack of a display could be due to either a res/refresh rate your monitor doesn't support, or IRIX is running in headless mode. You'll need single user access to fix though...

Indigo2 R10000/IMPACT  R10000 195MHz, 384MB RAM, MaxIMPACT (1MB), 36GB 15k & 300GB 10k drives, new/quiet fans, 100Mb G160 NIC, IRIX 6.5.22&
[Image: Fuelb.png] R14000 600MHz, 4GB RAM, V10 Graphics, 72GB 15k & 300GB 10k drives, new/quiet fans, 1Gb NIC, IRIX 6.5.30
O2  in storage...
Trippynet
Indigo2 IMPACT

Trade Count: (0)
Posts: 304
Threads: 7
Joined: Dec 2017
Find Reply
08-22-2018, 08:10 PM


Messages In This Thread

Forum Jump:


Users browsing this thread: 1 Guest(s)