[weblacky]

I know for a concentrated air movement (direct flow) you have to use a low-pressure method (slow intake, fast exhaust...so if that was the case than we'd need to somehow pull air out the back of the case faster than the fans in front bring it in, that will create central air flow directly in the passage. I believe that's what you're expressing.

The lack of rear room makes that a little hard...we COULD use a squirrel cage blower mounted UNDER the metal shield (between the metal shield and the rear of the heatsink, inline, pointed towards the rear video ports to accelerate air as exhaust? That would likely be the only way to do what you want without compromising the metal shield by cutting a hole in it.

We'd have to take some measurements and tap the metal shield to hold the blower upside down inside the card's empty space between the rear video output ports and the main heatsink. But the V10 has a lot of room towards the back (behind the video puts)...so having a blower there, aimed to the rear...sucking from the front...would be the simplest way to make that mod.

If this things runs, I'll see about looking into options....