IRIXNetwork


  1. IRIX Network Forums
  2. SGI/MIPS
  3. Hardware/Triage/Repair

The start of a LONG Fuel repair thread...
#9
RE: The start of a LONG Fuel repair thread...
Okay, here's the part where I need your help, fellows:

Since I got the a PSU in the same family as the original, I was even able to reuse the odd "hanger" on the front!  Sweet!  Fit like a glove!  Anyway, power is installed (no power connected to peripheral devices/drives though, on purpose).

I got the Fuel ATX adapter attached, I did BOTH the recommended 3.3v & 5v ONLY hookup (ATX) and L1 query and got this output.  Then I hooked ATX 3.3v & 5v AND 12v 8-pin prossor power up and got the SECOND log.  I'm posting this for completeness, the second log is MUCH more informative.


3.3v & 5v only L1 log:
Code:
ALERT: Error initializing the ODYSSEY monitor, no acknowledge
ALERT: Error setting fan speed on ODYSSEY monitor, no acknowledge




SGI SN1 L1 Controller

Firmware Image B: Rev. 1.28.3, Built 03/20/2004 00:01:57





001a01-L1>ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading the ODYSSEY temperature sensor, no acknowledge

INFO: 001a01 will power up system in  5 seconds...

INFO: 001a01 powering up the system.

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error initializing the ODYSSEY monitor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 12V bias) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 5V) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 2.5V) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 3.3V aux) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY temperature monitoring: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error initializing the ODYSSEY monitor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 12V bias) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 5V) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 2.5V) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 3.3V aux) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY temperature monitoring: no acknowledge

ALERT: Error initializing the ODYSSEY monitor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 12V bias) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 5V) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 2.5V) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 3.3V aux) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY temperature monitoring: no acknowledge

ERROR: 001a01 auto power up error.

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading the ODYSSEY temperature sensor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading the ODYSSEY temperature sensor, no acknowledge

env

ERROR: command not found.

001a01-L1>ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

env

Environmental monitoring is enabled, but not running (configuration error).



Description    State       Warning Limits     Fault Limits       Current

-------------- ----------  -----------------  -----------------  -------

           12V   Wait Pwr  10%  10.80/ 13.20  20%   9.60/ 14.40    0.06

        12V IO   Wait Pwr  10%  10.80/ 13.20  20%   9.60/ 14.40    0.06

            5V   Wait Pwr  10%   4.50/  5.50  20%   4.00/  6.00    0.08

          3.3V   Wait Pwr  10%   2.97/  3.63  20%   2.64/  3.96    0.64

          2.5V   Wait Pwr  10%   2.25/  2.75  20%   2.00/  3.00    0.00

          1.5V   Wait Pwr  10%   1.35/  1.65  20%   1.20/  1.80    0.00

        5V aux   Wait Pwr  10%   4.50/  5.50  20%   4.00/  6.00    5.04

      3.3V aux   Wait Pwr  10%   2.97/  3.63  20%   2.64/  3.96    3.27

PIMM0 12V bias   Wait Pwr  10%  10.80/ 13.20  20%   9.60/ 14.40    0.06

     Fuel SRAM   Wait Pwr  10%   2.25/  2.75  20%   2.00/  3.00    0.06

      Fuel CPU   Wait Pwr  10%   1.13/  1.38  20%   1.00/  1.50    0.01

    PIMM0 1.5V   Wait Pwr  10%   1.35/  1.65  20%   1.20/  1.80    0.04

PIMM0 3.3V aux   Wait Pwr  10%   2.97/  3.63  20%   2.64/  3.96    3.29

  PIMM0 5V aux   Wait Pwr  10%   4.50/  5.50  20%   4.00/  6.00    5.02

  XIO 12V bias   Wait Pwr  10%  10.80/ 13.20  20%   9.60/ 14.40    0.00

        XIO 5V   Wait Pwr  10%   4.50/  5.50  20%   4.00/  6.00    0.00

      XIO 2.5V   Wait Pwr  10%   2.25/  2.75  20%   2.00/  3.00    0.00

  XIO 3.3V aux   Wait Pwr  10%   2.97/  3.63  20%   2.64/  3.96    0.00



Description    State       Warning RPM  Current RPM

-------------- ----------  -----------  -----------

FAN 0  EXHAUST   Wait Pwr          920            0

FAN 1       HD   Wait Pwr         1560            0

FAN 2      PCI   Wait Pwr         1120            0

FAN 3    XIO 1   Wait Pwr         1600            0

FAN 4    XIO 2   Wait Pwr         1600            0

FAN 5       PS   Wait Pwr         1349            0



                              Advisory   Critical   Fault      Current

Description       State       Temp       Temp       Temp       Temp      

----------------- ----------  ---------  ---------  ---------  --------- 

0 NODE 0           Wait Pwr    [Autofan Control]    75C/167F   17C/ 62F

1 NODE 1           Wait Pwr    [Autofan Control]    75C/167F   17C/ 62F

2 NODE 2           Wait Pwr    [Autofan Control]    75C/167F   18C/ 64F

3 PIMM             Wait Pwr    [Autofan Control]    75C/167F   17C/ 62F

4 ODYSSEY          Wait Pwr    [Autofan Control]    75C/167F    0C/ 32F

5 BEDROCK          Wait Pwr  Not currently available



001a01-L1>ALERT: Error reading the ODYSSEY temperature sensor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading the ODYSSEY temperature sensor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading the ODYSSEY temperature sensor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge


3.3v AUX and 5V aux look good!

Okay, so I saw the ODYSSEY warnings and obviously was concerned, however this may be a false positive on a dead graphics card...it got SOMEWHAT better then I hooked 12V processor power to it:

ALL ATX and 12C 8-pin processor power:
Code:
ALERT: Error initializing the ODYSSEY monitor, no acknowledge
ALERT: Error setting fan speed on ODYSSEY monitor, no acknowledge




SGI SN1 L1 Controller

Firmware Image B: Rev. 1.28.3, Built 03/20/2004 00:01:57





001a01-L1>envALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge



Environmental monitoring is enabled, but not running (configuration error).



Description    State       Warning Limits     Fault Limits       Current

-------------- ----------  -----------------  -----------------  -------

           12V   Wait Pwr  10%  10.80/ 13.20  20%   9.60/ 14.40    0.19

        12V IO   Wait Pwr  10%  10.80/ 13.20  20%   9.60/ 14.40    0.19

            5V   Wait Pwr  10%   4.50/  5.50  20%   4.00/  6.00    0.08

          3.3V   Wait Pwr  10%   2.97/  3.63  20%   2.64/  3.96    0.64

          2.5V   Wait Pwr  10%   2.25/  2.75  20%   2.00/  3.00    0.00

          1.5V   Wait Pwr  10%   1.35/  1.65  20%   1.20/  1.80    0.00

        5V aux   Wait Pwr  10%   4.50/  5.50  20%   4.00/  6.00    5.04

      3.3V aux   Wait Pwr  10%   2.97/  3.63  20%   2.64/  3.96    3.27

PIMM0 12V bias   Wait Pwr  10%  10.80/ 13.20  20%   9.60/ 14.40    0.19

     Fuel SRAM   Wait Pwr  10%   2.25/  2.75  20%   2.00/  3.00    0.06

      Fuel CPU   Wait Pwr  10%   1.13/  1.38  20%   1.00/  1.50    0.01

    PIMM0 1.5V   Wait Pwr  10%   1.35/  1.65  20%   1.20/  1.80    0.04

PIMM0 3.3V aux   Wait Pwr  10%   2.97/  3.63  20%   2.64/  3.96    3.29

  PIMM0 5V aux   Wait Pwr  10%   4.50/  5.50  20%   4.00/  6.00    5.02

  XIO 12V bias   Wait Pwr  10%  10.80/ 13.20  20%   9.60/ 14.40    0.00

        XIO 5V   Wait Pwr  10%   4.50/  5.50  20%   4.00/  6.00    0.00

      XIO 2.5V   Wait Pwr  10%   2.25/  2.75  20%   2.00/  3.00    0.00

  XIO 3.3V aux   Wait Pwr  10%   2.97/  3.63  20%   2.64/  3.96    0.00



Description    State       Warning RPM  Current RPM

-------------- ----------  -----------  -----------

FAN 0  EXHAUST   Wait Pwr          920            0

FAN 1       HD   Wait Pwr         1560            0

FAN 2      PCI   Wait Pwr         1120            0

FAN 3    XIO 1   Wait Pwr         1600            0

FAN 4    XIO 2   Wait Pwr         1600            0

FAN 5       PS   Wait Pwr         1349            0



                              Advisory   Critical   Fault      Current

Description       State       Temp       Temp       Temp       Temp      

----------------- ----------  ---------  ---------  ---------  --------- 

0 NODE 0           Wait Pwr    [Autofan Control]    75C/167F   17C/ 62F

1 NODE 1           Wait Pwr    [Autofan Control]    75C/167F   17C/ 62F

2 NODE 2           Wait Pwr    [Autofan Control]    75C/167F   17C/ 62F

3 PIMM             Wait Pwr    [Autofan Control]    75C/167F   17C/ 62F

4 ODYSSEY          Wait Pwr    [Autofan Control]    75C/167F    0C/ 32F

5 BEDROCK          Wait Pwr  Not currently available



001a01-L1>ALERT: Error reading the ODYSSEY temperature sensor, no acknowledge

INFO: 001a01 will power up system in  5 seconds...

INFO: 001a01 powering up the system.

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error initializing the ODYSSEY monitor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 12V bias) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 5V) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 2.5V) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 3.3V aux) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY temperature monitoring: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error initializing the ODYSSEY monitor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 12V bias) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 5V) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 2.5V) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 3.3V aux) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY temperature monitoring: no acknowledge

ALERT: Error initializing the ODYSSEY monitor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 12V bias) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 5V) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 2.5V) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY power (XIO 3.3V aux) monitoring: no acknowledge

ALERT: Error configuring ODYSSEY temperature monitoring: no acknowledge

ERROR: 001a01 auto power up error.

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading the ODYSSEY temperature sensor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading the ODYSSEY temperature sensor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading the ODYSSEY temperature sensor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading the ODYSSEY temperature sensor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading the ODYSSEY temperature sensor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge

ALERT: Error reading the ODYSSEY temperature sensor, no acknowledge

ALERT: Error reading monitor ODYSSEY interrupt status 1: no acknowledge



Okay, more.  So assumptions:

1. Likely I'm looking at ENV Disease, does everyone concur?  I say this since I cannot get SEVERAL voltages from the listing and I tested this ATX PSU with a PSU tester, so I KNOW it's voltages were great at idle (at least) and the fan listing says that BEDROCK is not available, which I assume is MAINBOARD ENV stuff. Thoughts?

2. Does any of this mess indicate a graphics V10 failure at this time?  The word ODYSSEY scares me, but I know it's also the term for something else (like the bedrock) right?

I have all the equipment and the ICs to do ENV disease right now!  So I'm fine with going that route first.

In the meantime, anyone with real-world experience, anything in the log that looks odd, that might be something additional/other-than ENV Disease (at this point)?  I need eyeballs from people who've been here before.  Tell me what you see.


OK, so not dead!  Great!  I will make plans to fully remove the main board and such and attempt an IC transfusion.  Given the output I KNOW at least one IC on the mainboard went but I'm wondering if I need to replace the PIMM one AND/OR the V10 ENV IC as well?  I see main voltage errors/warnings...I see 5V on PIMM is correct, so I assume the IC on the PIMM is working?  But since XIO is MAIN voltage...I'm uncertain on V10. 

I'd love to hear everyone's thoughts on this.  I'll keep you guys updated!
Tezro Tezro Fuel Octane2 Octane Octane Octane O2 O2 Indigo2 R10000/IMPACT Indigo2 R10000/IMPACT  Indigo2 R10000/IMPACT Indigo2 Indigo2 Indy Indy Indy Indy Indy Indigo  NEED ->  O2plus

WANTED PARTS
PARTS FOR SALE:
REPAIR SERIVCES:
(This post was last modified: 10-29-2021, 08:44 PM by weblacky. Edit Reason: Spelling. )
 weblacky
I play an SGI Doctor, on daytime TV.

Trade Count: (10)
Posts: 1,716
Threads: 88
Joined: Jan 2019
Location: Seattle, WA
Find Reply
10-29-2021, 08:42 PM
« Next Oldest | Next Newest »


Messages In This Thread
The start of a LONG Fuel repair thread... - by weblacky - 10-22-2021, 05:26 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 10-22-2021, 06:21 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 10-22-2021, 06:34 AM
RE: The start of a LONG Fuel repair thread... - by indigofan - 10-22-2021, 01:34 PM
RE: The start of a LONG Fuel repair thread... - by Raion - 10-22-2021, 01:41 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 10-22-2021, 03:57 PM
RE: The start of a LONG Fuel repair thread... - by Shiunbird - 10-22-2021, 08:27 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 10-29-2021, 03:05 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 10-29-2021, 08:42 PM
RE: The start of a LONG Fuel repair thread... - by jwhat - 10-29-2021, 10:15 PM
RE: The start of a LONG Fuel repair thread... - by Raion - 10-29-2021, 10:36 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 10-29-2021, 10:46 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 10-31-2021, 05:28 AM
RE: The start of a LONG Fuel repair thread... - by Raion - 10-31-2021, 05:36 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 10-31-2021, 05:55 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-01-2021, 03:23 AM
RE: The start of a LONG Fuel repair thread... - by Raion - 11-01-2021, 03:50 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-01-2021, 04:05 AM
RE: The start of a LONG Fuel repair thread... - by Raion - 11-01-2021, 04:52 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-03-2021, 01:27 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-03-2021, 04:54 AM
RE: The start of a LONG Fuel repair thread... - by Raion - 11-03-2021, 05:02 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-03-2021, 06:28 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-03-2021, 11:36 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-03-2021, 11:54 PM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-04-2021, 01:21 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-04-2021, 01:59 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-04-2021, 04:30 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-04-2021, 05:32 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-04-2021, 06:23 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-05-2021, 09:47 PM
RE: The start of a LONG Fuel repair thread... - by Raion - 11-06-2021, 02:17 AM
RE: The start of a LONG Fuel repair thread... - by vvuk - 11-07-2021, 07:49 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-07-2021, 02:45 PM
RE: The start of a LONG Fuel repair thread... - by vvuk - 11-07-2021, 05:00 PM
RE: The start of a LONG Fuel repair thread... - by Raion - 11-07-2021, 03:30 PM
RE: The start of a LONG Fuel repair thread... - by Raion - 11-07-2021, 06:46 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-07-2021, 08:11 PM
RE: The start of a LONG Fuel repair thread... - by vvuk - 11-07-2021, 08:35 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-07-2021, 10:43 PM
RE: The start of a LONG Fuel repair thread... - by vvuk - 11-08-2021, 08:51 PM
RE: The start of a LONG Fuel repair thread... - by Raion - 11-07-2021, 08:59 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-09-2021, 12:34 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-12-2021, 10:50 PM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-12-2021, 11:04 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-12-2021, 11:08 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-13-2021, 02:18 AM
RE: The start of a LONG Fuel repair thread... - by Raion - 11-13-2021, 02:34 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-13-2021, 02:52 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-13-2021, 03:49 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-13-2021, 04:02 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-13-2021, 05:31 AM
RE: The start of a LONG Fuel repair thread... - by Raion - 11-13-2021, 05:34 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-13-2021, 06:27 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-17-2021, 06:06 AM
RE: The start of a LONG Fuel repair thread... - by Raion - 11-17-2021, 07:28 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-17-2021, 07:51 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-17-2021, 12:31 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-17-2021, 12:43 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-20-2021, 01:37 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-20-2021, 05:30 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-20-2021, 06:35 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-21-2021, 01:29 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-21-2021, 05:46 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-21-2021, 06:13 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-21-2021, 06:42 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-21-2021, 06:54 AM
RE: The start of a LONG Fuel repair thread... - by robespierre - 11-21-2021, 08:04 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-21-2021, 08:39 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-21-2021, 10:03 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-21-2021, 11:55 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 11-21-2021, 11:16 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 11-27-2021, 03:12 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 12-02-2021, 12:43 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 12-07-2021, 04:47 AM
RE: The start of a LONG Fuel repair thread... - by Raion - 12-07-2021, 06:49 AM
RE: The start of a LONG Fuel repair thread... - by jwhat - 12-07-2021, 07:40 AM
RE: The start of a LONG Fuel repair thread... - by jan-jaap - 12-07-2021, 02:46 PM
RE: The start of a LONG Fuel repair thread... - by indigofan - 12-07-2021, 04:34 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 12-07-2021, 04:56 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 12-16-2021, 12:13 AM
RE: The start of a LONG Fuel repair thread... - by jan-jaap - 12-16-2021, 08:38 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 12-16-2021, 09:25 AM
RE: The start of a LONG Fuel repair thread... - by weblacky - 01-02-2022, 01:08 AM
RE: The start of a LONG Fuel repair thread... - by megaimg - 01-10-2022, 03:58 AM
RE: The start of a LONG Fuel repair thread... - by jan-jaap - 01-02-2022, 08:15 PM
RE: The start of a LONG Fuel repair thread... - by weblacky - 01-02-2022, 08:48 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)