[grom371]

Starting diagnostic program...

                      Press <Esc> to return to the menu.

      Checking for Distribution CD-ROM on xio(0)pci(15)scsi(1)cdrom(6).
                    Booting IDE from Distribution CD-ROM.

    IDE CPU 1 [slave]
SGI Version 6.5 IP30 IDE field  Oct 10, 2002

                  System: IP30
                Processor: 400 Mhz R12000, 2M secondary cache
                Processor: 400 Mhz R12000, 2M secondary cache, (cpu 1)
              Memory size: 2048 Mbytes
                  Network: ef0 ethernet (100/10 base-T)
                SCSI Disk: scsi(0)disk(1)
              SCSI CDROM: scsi(1)cdrom(6)
                    Audio: RAD Audio Processor
                  GIO Bus: GALILEO15 (11)
                  PCI Bus: FIBRE_CHANNEL (9)
              PCI Device: slot 0 vendor 0x9004 part 0x1160 rev 4
              PCI Device: slot 1 vendor 0x9004 part 0x1160 rev 4
                Graphics: EMXI

Field included scripts (help_ide to get this again):
  ALL:    regular_tests
          extended_tests
  FRUs:  ip30  frontplane  memory
          pm (processor module)
          gfx  tmezz
  subsystems: serial (loopback)  ethernet (loopback)
  useful scripts:        help_ide  help_mem

    This test takes approximately 12 minutes on a good
    dual processor machine with 128MB memory and MXI graphics.

Testing Graphics in XIO slot 12
Testing TMEZZ option card.

Exception: <vector=Normal>
Status register: 0x34050082<CU1,CU0,FR,CH,DE,IPL=8,KX,MODE=KERNEL,EXL>
Cause register: 0x801c<CE=0,IP8,EXC=DBE>
Exception PC: 0xa800000020892844, Exception RA: 0xa80000002089295c
Data Bus error
HEART ISR :      0x4000000000000<TIMER>
HEART IMSR:      0x0
XBOW status: 0x1000000<LINK_8>
  Link 0x8 status: 0xffffffff80060000<LINK_ALIVE,MULTI,ILLEGAL_DST,BANDWIDTH_ALLOC_PORT=0x0>
      Aux status: 0x20<RCV_RETRIES=0,XMT_RETRIES=0,TIMEOUT_SRC=0x0,PORT=ON,PORT_SIZE=16>
Error command word: 0x0
        Error address: 0x0
IOC3 PCI status register: 0xa800146<SIG_TAR_ABRT>
  VID 0's saved user regs in hex (gpda=0xa800000020a1af28):
  arg: 3 0 0 a800000020912ffc
      0 0 0 a800000020a1af28
  tmp: a800000025e1c2f4 a800000020a1af28 1 9000000010000000
  sve: a800000020912f30 a80000002093c370 a80000002093c368 a8000000a0000000
      a800000020a033a0 a800000020a1af28 24 9000000010000024
  t8 1 t9 20929ca8 at 0
  v0 0 v1 7f k1 ffffffffbad11bad
  gp 0 fp 1 sp a800000020ac5390 ra a80000002089295c

PANIC: Unexpected exception

[Press reset or ENTER to restart.]


Is this solution? - You've got an MXE board and it has 2 texture boards installed. If you get diagnostics results complaining about texture errors, try to re-seat them.