[kokoboi]

001c01-L1>debug 0x08
debug switches set to 0x0008
001c01-L1>pwr u
001c01-L1>
entering console mode  001c01 CPU0, <CTRL_T> to escape to L1
Starting PROM Boot process
io_config_space: Found 0 Qlogic devices BASEIO; expected 1 or more.
io_config_space failed:
RSLT io_config_spac FAIL                diag_rc = 53
diag_io6confSpace_sanity: /hw/module/001c01/xtalk/15: FAILED


IP35 PROM SGI Version 6.210  built 02:33:51 PM Aug 26, 2004
*** Warning: System controller debug switches are non-zero (0x8)
*** Boot stop requested at Global (2)
Testing/Initializing memory ...............            DONE
Copying PROM code to memory ...............            DONE
Discovering local IO ......................            DONE
Discovering NUMAlink connectivity .........
Local hub NUMAlink is down.
*** Local network link down
DONE
Found 1 objects (1 hubs, 0 routers) in 5893 usec
Waiting for peers to complete discovery....            DONE
No other nodes present; becoming global master
Global master is /hw/rack/001/bay/01
Intializing any CPUless nodes..............            DONE
Checking partitioning information .........            DONE
No other nodes present; becoming partition master
Local slave entering slave loop
Local slave entering slave loop
Local slave entering slave loop
A 000 001c01:
A 000 001c01: *** Entering POD mode on node 0
A 000 001c01: POD SysCt Cac> go cac
A 000 001c01: Must be in Dex mode before switching to Cac or Unc.
A 000 001c01: POD SysCt Cac>
A 000 001c01: POD SysCt Cac> clearalllogs
A 000 001c01: *** This must be run only after NUMAlink discovery is complete.
A 000 001c01: *** This will clear all previous log variables such as:
A 000 001c01: *** moduleids, nodeids, etc. for all nodes.
A 000 001c01: Clear all logs? [n] y
A 000 001c01: Checking 1 entries for promlogs
A 000 001c01: .DONE
A 000 001c01: All PROM logs cleared!
A 000 001c01: POD SysCt Cac> resetalllogs
A 000 001c01:                ^ Syntax error
A 000 001c01: POD SysCt Cac> initalllogs
A 000 001c01: *** This must be run only after NUMAlink discovery is complete.
A 000 001c01: *** This will clear all previous log variables such as:
A 000 001c01: *** moduleids, nodeids, etc. for all nodes.
A 000 001c01: Clear all logs environment variables, and aliases ? [n] y
A 000 001c01: Checking 1 entries for promlogs
A 000 001c01: .DONE
A 000 001c01: All PROM logs cleared!
A 000 001c01: POD SysCt Cac> flush
A 000 001c01: POD SysCt Cac> reset
A 000 001c01: Resetting the system...

I've set the debug to 0x00 again.
now I see this errors again:

returning to console mode  001c01 CPU0, <CTRL_T> to escape to L1
Starting PROM Boot process
io_config_space: Found 0 Qlogic devices BASEIO; expected 1 or more.
io_config_space failed:
RSLT io_config_spac FAIL                diag_rc = 53
diag_io6confSpace_sanity: /hw/module/001c01/xtalk/15: FAILED
.....

This is driving me crazy