[Irinikus]

If worst comes to worst, check each of the lines on your environmental settings against mine, and use the "setenv" command to set them as required.

---

Here's a screenshot from my video showing what my machine says at that point and its the same:



Your initial boot sequence that you posted said nothing about graphics:

IP27 PROM SGI Version 6.156 built 11:27:56 AM Nov 18, 2003
Testing/Initializing memory …………… DONE
Copying PROM code to memory …………… DONE
Discovering local IO ………………….
Found an io Board with nic 030-1305-001.
DONE
Discovering NUMAlink connectivity ……… DONE
Found 2 objects (2 hubs, 0 routers) in 10464 usec
Waiting for peers to complete discovery…. DONE
Global master is /hw/module/1/slot/n2
Testing/Initializing all memory ……….. DONE
Checking partitioning information ……… DONE
Loading BASEIO prom ………………….. DONE

BASEIO PROM Monitor SGI Version 6.156 built 11:26:28 AM Nov 18, 2003 (BE64)
4 CPUs on 2 nodes found.
Installing PROM Device drivers …………
Base I/O Ethernet set to /dev/ethernet/ef0

Walking SCSI Adapter 0 (/hw/module/1/slot/io1), (pci id 0)
1+ 2- 3- 4- 5- 6+ 7- 8- 9- 10- 11- 12- 13- 14- 15- = 2 device(s)


Walking SCSI Adapter 1 (/hw/module/1/slot/io1), (pci id 1)
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s)

Initializing PROM Device drivers ………. DONE
Checking hardware inventory …………… DONE