[noleex]

Thanks, finally thats the console output / but no screen:
IP27 PROM SGI Version 6.156  built 11:27:56 AM Nov 18, 2003
Testing/Initializing memory …………… DONE
Copying PROM code to memory …………… DONE
Discovering local IO ………………….
Found an io Board with nic 030-1305-001.
DONE
Discovering NUMAlink connectivity ……… DONE
Found 2 objects (2 hubs, 0 routers) in 10464 usec
Waiting for peers to complete discovery…. DONE
Global master is /hw/module/1/slot/n2
Testing/Initializing all memory ……….. DONE
Checking partitioning information ……… DONE
Loading BASEIO prom ………………….. DONE

BASEIO PROM Monitor SGI Version 6.156  built 11:26:28 AM Nov 18, 2003 (BE64)
4 CPUs on 2 nodes found.
Installing PROM Device drivers …………           
Base I/O Ethernet set to /dev/ethernet/ef0

Walking SCSI Adapter 0 (/hw/module/1/slot/io1), (pci id 0)
1+ 2- 3- 4- 5- 6+ 7- 8- 9- 10- 11- 12- 13- 14- 15- = 2 device(s)


Walking SCSI Adapter 1 (/hw/module/1/slot/io1), (pci id 1)
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s)

Initializing PROM Device drivers ……….            DONE
Checking hardware inventory ……………              DONE


**** System Configuration and Diagnostics Summary ****

CONFIG:

        No. of NODEs enabled    = 2

        No. of NODEs disabled  = 0

        No. of CPUs enabled    = 4

        No. of CPUs disabled    = 0

        Mem enabled            = 4096 MB

        Mem disabled            = 0 MB

        No. of RTRs enabled    = 0

        No. of RTRs disabled    = 0


DIAG RESULTS:

        ALL DIAGS PASSED.

**** End System Configuration and Diagnostics Summary ****



System Maintenance Menu

1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor