[gmcenroe]

I replaced my CDROM drive with a new (well new to me) CDROM drive in the drive sled. It is a TOSHIBA 6201B unit with SCSI ID set to 6, no additional jumpers installed. If the Indigo2 is in vertical position the tray will not open. OK figured that out by putting it horizontal. Now if I put a CD audio disk in it does not play. If I put an IRIX Applications disk in and click on the CDROM drive disk, I get a Notifier message that says CDROM drive is unloaded. On the 50 pin SCSI ribbon there is an additional 6 pin femaie connector, that is somewhat separate from the ribbon. Is that for the audio connection? The white receptacle on the CDROM for audio only has 3 pins. I can see the CDROM on hinv output.

Any help would be appreciated.

Glenn