[weblacky]

Hi,
Please post speed set commands, they don't exist anywhere but in someone's head right now.

Two counter points:

1. To speed down, you still need to do something on the L1. Can you please post the instructions?

2. It's not 100% known you cannot go other other way. Because there is evidence you can start the Fuel L1 without any PIMM installed in the machine:

https://gainos.org/~elf/sgi/nekonomicon/...947/1.html

Since no one has claimed (failure or success) to try getting the L1 to start without ANY PIMM, speeding down via commands to L1, then powering off, then installing a PIMM, we really don't know for sure (until it's tried) that you can't use this (no PIMM) loop hole to down-clock.

And if you can get it to start (via restart PSU roulette madness), it's unknown if (without the PIMM hardware present) whether the set commands would take affect/stick/remembered. But it's POSSIBLE, since the L1 has to remember what speed to use if you ever take out your PIMM and happen to power it on (it's not lost information).

So two unknowns, it might be possible to down-clock without an existing PIMM, point is...right now...we can't do anything, because no one has a post with the commands that I've found via google right now...Arc lost in the government warehouse...

Thanks,