[Jacques]

Let me know if you need anything measured, I'm packing the O2 and 1600sw monitor away in long term storage on the weekend. I'm only keeping my Octane out.

[m_emelchenkov]

JacquesT, I have disassembled my second one, and can tell you the proper order of color filters: the very bottom (which you can see through the hole) is blue. In the middle—green. The very top—yellow.

As for capacitor, unfortunately, it was broken too, like on my first device. But on the first device it was broken in the middle part, and on this, second device, it is broken nearby its edge. I measured it, it was around 79-81pf as measured by mini component tester. So, I assume, the non-broken one could be 100pf.

It seems, these devices can't survive shipping. Or just have internal stresses so SMD is broken due time.

I will buy replacement of both capacitors and try both devices on a real system, but it will be later.

[Jacques]

JacquesT, I have disassembled my second one, and can tell you the proper order of color filters: the very bottom (which you can see through the hole) is blue. In the middle—green. The very top—yellow.

As for capacitor, unfortunately, it was broken too, like on my first device. But on the first device it was broken in the middle part, and on this, second device, it is broken nearby its edge. I measured it, it was around 79-81pf as measured by mini component tester. So, I assume, the non-broken one could be 100pf.

It seems, these devices can't survive shipping. Or just have internal stresses so SMD is broken due time.

I will buy replacement of both capacitors and try both devices on a real system, but it will be later.

Thank you for the information.