Can I put a High IMPACT and Solid IMPACT in the same Indigo2?
I have both Solid Impact and High Impact boards for my Indigo2 R10K. Is it possible to install both and use two monitors?
If possible, I assume only the monitor connected to the High Impact board will get hardware textures.
Sound nuts?
|
|
synthetix
gcc -O3
Trade Count:
(0)
Posts: 45
Threads: 11
Joined: Aug 2020
Location: 🇺🇸
|
|
|
05-17-2021, 05:16 PM |
RE: Can I put a High IMPACT and Solid IMPACT in the same Indigo2?
Yes, it's a supported configuration with the 060-0027-xxx power supply.
The two graphics modules must plug into different logical slots (Slot0 is lowest, Slot1 is highest) on the midplane.
|
|
robespierre
refector peritus
Trade Count:
(0)
Posts: 640
Threads: 3
Joined: Nov 2020
Location: Massholium
|
|
|
05-17-2021, 06:20 PM |
RE: Can I put a High IMPACT and Solid IMPACT in the same Indigo2?
You should be fine to run both of the cards as long as the power supply hasn't been changed out to a 060-8001-XXX or 9430814. You are also correct that only the HI will have hardware texturing.
|
|
Archaic
O2
Trade Count:
(0)
Posts: 10
Threads: 1
Joined: May 2019
|
|
|
05-17-2021, 06:25 PM |
(past: 
)