[cascatino]

Hi there, I've got a Fuel with V10 installed. I would like to use my SoG monitor with its native 1680x1050 resolution but it is not available in the res list inside the configuration panel.
I've found an old Nekochan topic but it was not of great help for me.
Can you please give me some advice about this issue? Is it possible to drive my Fuel@1680x1050 (or more)?

thanks

[Jacques]

You should be able to as the resolution is well within the capabilities of the V10. Have you tried compiling your own vfc file?

[Noguri]

Hi,

I created a vfo file for you (1680x1050 Odyssey, refresh rate will be 60Hz):
1680x1050_60.vfo
(with default BlockSync.vfs template so might not be optimal. It should be good enough to start with anyway...)


Step 1: Download the file

Step 2: Put it file in folder
/usr/gfx/ucode/ODSY/vof

Step 3: Open the Display Properties. You should find what you need it in the list...

Note:
There are already fantastic posts and support on this topic. Here are few of them:

1600x1200 on O2
Custom vfo for Odyssey

Regards

[cascatino]

Thank you very much!