IRIXNetwork


  1. IRIX Network Forums
  2. SGI/MIPS
  3. Hardware/Triage/Repair

Indigo2 psu pinout
#5
RE: Indigo2 psu pinout
Ok i made it run without motherboard. Connecting together J10 pin 5 and J11 pin 11 work. But only for a second and with the psu disconnected.

Indigo 2 psu seem to work the opposite respect to atx psu. It need positive voltage to start, while atx need to be connected to gnd.

The sequence is:
Disconnect psu from main line.
Connect the two pins together
Reconnect psu to line
Psu start for a second

I think the psu is gone...
(This post was last modified: 09-08-2019, 09:05 PM by Luke.)
 Luke
O2

Trade Count: (0)
Posts: 10
Threads: 1
Joined: Sep 2019
Find Reply
09-08-2019, 09:01 PM
« Next Oldest | Next Newest »


Messages In This Thread
Indigo2 psu pinout - by Luke - 09-05-2019, 09:35 PM
RE: Indigo2 psu pinout - by GRudolf94 - 09-06-2019, 02:44 PM
RE: Indigo2 psu pinout - by Luke - 09-06-2019, 06:52 PM
RE: Indigo2 psu pinout - by Luke - 09-08-2019, 09:33 AM
RE: Indigo2 psu pinout - by Luke - 09-08-2019, 09:01 PM
RE: Indigo2 psu pinout - by Luke - 09-11-2019, 05:15 AM
RE: Indigo2 psu pinout - by jan-jaap - 09-11-2019, 09:10 AM
RE: Indigo2 psu pinout - by Luke - 09-11-2019, 01:28 PM
RE: Indigo2 psu pinout - by Luke - 09-13-2019, 06:13 AM
RE: Indigo2 psu pinout - by Trippynet - 09-13-2019, 06:50 AM
RE: Indigo2 psu pinout - by Luke - 09-13-2019, 08:41 AM
RE: Indigo2 psu pinout - by Trippynet - 09-13-2019, 08:16 PM
RE: Indigo2 psu pinout - by Luke - 09-23-2019, 06:27 AM
RE: Indigo2 psu pinout - by GRudolf94 - 09-28-2019, 09:27 PM
RE: Indigo2 psu pinout - by Irinikus - 09-29-2019, 07:46 PM
RE: Indigo2 psu pinout - by Luke - 10-02-2019, 10:32 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)