IRIXNetwork


  1. IRIX Network Forums
  2. SGI/MIPS
  3. Beginners' Questions/Tips

First Boot
#8
RE: First Boot
(11-02-2018, 08:07 PM)massiverobot Wrote:  Digging this out I actually have a SCSI to SATA- it's not based on the SCSI2SD design at all, rather this:

http://www.stratos-technology.com/cgi/Sh...TileViewer

I've plugged it in and i think there are some termination errors but the bootprom shows a scsi device attached with it connected.

Picts:
https://imgur.com/a/VZopoki

I may pick up a scsi2cd if this doesn't work.

I will also pick up some more ram.

Do share how that one goes. Probably a jumper issue, have not checked docs but you should probably be okay closing 1 and T and leaving the two other ones (2, 4) open.
:Indy: R4000 @100MHz, 96MB, 3GB, XL Newport | :O2: R5000 @180MHz, 256MB, 36GB, CRM | :Indigo2: R4400 @250MHz, 192MB, 36GB, Elan + XZ | :Octane: R10000 @250MHz, 1024MB, 8GB+2GB, ESSI.



 mamorim01
Octane

Trade Count: (0)
Posts: 99
Threads: 4
Joined: Oct 2018
Location: Spain
Website Find Reply
11-02-2018, 08:12 PM
« Next Oldest | Next Newest »


Messages In This Thread
First Boot - by massiverobot - 11-02-2018, 02:20 PM
RE: First Boot - by mamorim01 - 11-02-2018, 02:34 PM
RE: First Boot - by dexter1 - 11-02-2018, 05:13 PM
RE: First Boot - by BackPlaner - 11-02-2018, 05:22 PM
RE: First Boot - by mamorim01 - 11-02-2018, 06:28 PM
RE: First Boot - by gijoe77 - 11-02-2018, 07:28 PM
RE: First Boot - by massiverobot - 11-02-2018, 08:07 PM
RE: First Boot - by mamorim01 - 11-02-2018, 08:12 PM
RE: First Boot - by gijoe77 - 11-02-2018, 08:13 PM
RE: First Boot - by massiverobot - 11-02-2018, 08:24 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)