[Dzeimis]

Hi everyone

I posted about my problem on nekochan a year ago (which I was directed to by reddit where I asked about my issue first), but haven't found any solution since then and just put my problem away to deal with later... 

Long story short, my Tezro doesn't boot and I have no idea why. The front panel had only solid red LED lighted which, according to manual, means "System node board failure (failed to read PROM at power on)". There were some bent pins between motherboars and node board (pics in reddit post) which I think I fixed, but not 100% sure about it. Still doesn't boot.

I had another computer connected to serial console and tried several things which I don't remember exactly, but I found some saved snippets on my laptop which are attached to this post. I don't remember what I did to cause general exception or controller firmware panic...
Let me know if there's anything I can do to provide more information. I will try booting this system when I get back home this weekend.

Can anybody with a working Tezro tell me if they also get messages "Cannot enable VRM: x" in console when the system is just started (or plugged in to wall socket... Don't remember anymore)?

Edit: forgot to actually attach Tezro output that I had saved.