[jander31]

I got my Origin 300 to boot to L1 (bought an appropriate console cable, DB9 to USB). A few L1 commands are unavailable, but I cannot seem to get past L1. FAN 0 (left) died on me, and I'm not sure if this is causing the "power up" command to not really work. Does anyone know what my options are for replacement fans (if this is indeed the issue)? I bought a 73GB SCSI (U160) for the server, and it starts up alright. I'm trying to do a network install of IRIX 6.5.22 via LOVE, and I believe I need to get past L1 to even begin this process.

This is what happens when I do "power up":

05/05/25 20:40:33 power up (COMMAND)
05/05/25 20:40:38 reset again MIPS
05/05/25 20:40:56 FAN 0 warning limit reached @ 0 RPM.
05/05/25 20:40:56 Environmental redundancy lost.
05/05/25 20:41:28 SMP-R: UART:UART_NO_CONNECTION

And here's "env":

001c01-L1>env
Environmental monitoring is enabled and running.

Description State Warning Limits Fault Limits Current
-------------- ---------- ----------------- ----------------- -------
12V IO Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.25
12V DIG Enabled 10% 10.80/ 13.20 20% 9.60/ 14.40 12.12
5V Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 4.99
3.3V Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.34
5V aux Enabled 10% 4.50/ 5.50 20% 4.00/ 6.00 4.97
3.3V aux Enabled 10% 2.97/ 3.63 20% 2.64/ 3.96 3.41
2.5V Enabled 10% 2.25/ 2.75 20% 2.00/ 3.00 2.50
Speedo2 CPU Enabled 10% 1.44/ 1.76 20% 1.28/ 1.92 1.61
1.5V Enabled 10% 1.35/ 1.65 20% 1.20/ 1.80 1.49

Description State Warning RPM Current RPM
-------------- ---------- ----------- -----------
FAN 0 LEFT Fault 2160 0
FAN 1 CENTER Enabled 2160 4155
FAN 2 RIGHT Enabled 2160 4207
FAN 3 PS Enabled 2160 3146
FAN 4 PS' Enabled 2160 4549

Advisory Critical Fault Current
Description State Temp Temp Temp Temp
-------------- ---------- --------- --------- --------- ---------
NODE 0 Enabled 30C/ 86F 35C/ 95F 40C/104F 24C/ 75F
NODE 1 Enabled 30C/ 86F 35C/ 95F 40C/104F 22C/ 71F

001c01-L1>cpu
command not supported on this brick type.
001c01-L1>