[zthart]

Quick update, I have resolved my issues here. The root cause was a hardware issue with the ZuluSCSI - I reached out to the creator and got it sorted with them. In my case it required a quick bodge on the PCB. I am not sure if this is a one off issue for me, if the hardware revision I received has a bug, or what the case is. For folks that stumble on this in the future, my suggestion is just to reach out to RHC - your issues may be different than mine, ymmv, etc.

If you are having issues where it appears your devices are read-only using the ZuluSCSI V6:

• Reach out to the project creators at Rabbit Hole Computing to get it sorted
  

To be clear:

• The ZuluSCSI V6 does not require any special formatting of your SD Card
  
• The ZuluSCSI V6 does not require you create appropriately-named image files on your SD card on another machine
  
• The ZuluSCSI V6 is entirely configured by the utility linked on it's product page at the RHC store
  
• The ZuluSCSI V6 does not work like the ZuluSCSI RP2040 or the ZuluSCSI V1.2 - the V6 means it's a successor to the SCSI2SD V6, not a new hardware revision of other ZuluSCSI models.
  

If you are struggling with the ZuluSCSI V6, make sure that you aren't following a guide for another model of the ZuluSCSI - guides for the SCSI2SD V6 will be more accurate.