[VisualCortexLab]

The documentation has just been update with your feedback, both on Github and http://irix.mersisl.com/

Regarding your question and according to the documentation https://github.com/Linux-RISC/Reanimator...l_guide.md, we have to skip "/" before "i" and the path is slightly different depending on the case:

bootp():IRIX/6.5.22/ovl1/stand/fx.ARCS -x
- the home directory for tftp (/etc/inetd.conf) is /srv/tftp/i and points to /home/irix/i, so "i/" is avoided.

irix@rbpi:i/IRIX/6.5.22/ovl1/dist
- the home directory for "irix" user is /home/irix, so you must add "i/" to access to that directory.

Perhaps the installation on your model is more tricky than usual for some reason, the tftp server could work with the "/i" path for unknown reasons, but I'm sure I tested "/i" with "irix" user and it didn't work in some context.

Anyway, thanks for your feedback !

By the way, your collection is absolutely amazing :-), please let me know when you use Reanimator with different models to keep the table updated.

ahhh that would make sense now! Thanks for pointing that out.
I must admit, not using these machines for 20 years definetely made me forget a lot.


I'll probably try to install an Indy R5000 one of these days, I'm just not sure I have an hard drive for it.... I'll report back once that's done

Thank you!