Hey guys,
For those who remember me, I'm sum][one from Nekochan, and I now live in Toronto (used to be in Italy, then UK).
I'm planning some changes in my life and therefore I'm considering selling some more of my beloved SGIs and give them a new home, including my favourite, The Onyx2 Deskside.
So, for sale here is my Onyx2 Deskside, in perfect condition and fully functional.
As I'm trying to understand the feasibility of this I'd prefer if you could contact me if you are really interested.
I would imagine my asking price is in the CAD$4,900/6.900 ballpark, o.n.o and I'll adjust if needed.
As I've relocated here early last year, the machine is based in Toronto at the moment and I'd much prefer to sell it in person rather than shipping it.
I would be willing to drive within the GTA (or reasonably close outside of it) and deliver as well, or have you collect in person.
I would just wipe some sensitive data but I could leave various software and IRIX installed, or remove the Disks altogether and provide with Empty replacement (I have tons of spare HDDs and sleds).
I've attached a couple of photos shot today, I can provide more if you need, or you can also look at my gallery (from the good old Nekochan era) here:
https://www.mimgfx.visualcortexlab.com/?...&sub=onyx2
From these photos (and the HINV below) you'll see a 8 Channels Graphics board, but that has been swapped soon after with a 2 channels InfinteReality2.
The rest of the configuration is pretty much the same.
I can power the beast on and send an updated HINV if you are really interest in buying it.
I'll try and keep an eye on this forum more often so you can PM me, or I'll drop my email if that works best.
Cheers!
Code:
Location: /hw/module/1/slot/n2/node
IP31PIMMSG2100 Board: barcode LAY938 part 030-1572-001 rev F
Group ff Capability ffffffff Variety ff Laser 0000004817d1
IP31 Board: barcode KRK886 part 030-1523-001 rev C
Group ff Capability ffffffff Variety ff Laser 0000004886c3
Location: /hw/module/1/slot/n1/node
MODULEID Board: barcode K0011524 part rev
Group ff Capability ffffffff Variety ff Laser 000000ac6872
IP31 Board: barcode LAM856 part 030-1523-001 rev C
Group ff Capability ffffffff Variety ff Laser 000000400b84
IP31PIMMSG2100 Board: barcode LAW192 part 030-1572-001 rev F
Group ff Capability ffffffff Variety ff Laser 0000003fefea
4P1G5_MPLN Board: barcode FLC742 part 013-1839-001 rev F
Group ff Capability ffffffff Variety ff Laser 00000015a5f6
Location: /hw/module/1/slot/io4/kona
GE14-4 Board: barcode ENR945 part 030-1129-002 rev F
Group ff Capability ffffffff Variety ff Laser 000000179d98
Location: /hw/module/1/slot/io2/pci_xio
PCI-XIO Board: barcode EMR505 part 030-1062-002 rev C
Group ff Capability ffffffff Variety ff Laser 00000015e28d
Location: /hw/module/1/slot/io6/fibre_channel
FIBRE_CHANNEL Board: barcode GMX218 part 030-0927-003 rev E
Group ff Capability ffffffff Variety ff Laser 0000002ae195
Location: /hw/module/1/slot/io5/mscsi
MSCSI Board: barcode GSE472 part 030-1243-001 rev H
Group ff Capability ffffffff Variety ff Laser 000000214221
Location: /hw/module/1/slot/io3/divo
DIVO Board: barcode JGZ244 part 030-1387-001 rev E
Group ff Capability ffffffff Variety ff Laser 00000034b2ba
DVCPRO_CODEC Board: barcode JHH406 part 030-1388-001 rev B
Group ff Capability ffffffff Variety ff Laser 000000348e03
DVCPRO_CODEC Board: barcode HTX590 part 030-1388-001 rev B
Group ff Capability ffffffff Variety ff Laser 000000343bf3
Location: /hw/module/1/slot/io1/baseio
BASEIO Board: barcode GAM485 part 030-0734-002 rev K
Group ff Capability ffffffff Variety ff Laser 0000001af1a8
MIO Board: barcode GAD585 part 030-0880-003 rev F
Group ff Capability ffffffff Variety ff Laser 0000001a6c94
4 350 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 3.5
Location: /hw/module/1/slot/n2/node/cpubus/0/a
CPU 0 at Module 1/Slot 2/Slice A: 350 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 4 MB Speed 233 Mhz Tap 0x9
Location: /hw/module/1/slot/n2/node/cpubus/0/b
CPU 1 at Module 1/Slot 2/Slice B: 350 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 4 MB Speed 233 Mhz Tap 0x9
Location: /hw/module/1/slot/n1/node/cpubus/0/a
CPU 2 at Module 1/Slot 1/Slice A: 350 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 4 MB Speed 233 Mhz Tap 0x9
Location: /hw/module/1/slot/n1/node/cpubus/0/b
CPU 3 at Module 1/Slot 1/Slice B: 350 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 3.5. Scache: Size 4 MB Speed 233 Mhz Tap 0x9
Main memory size: 7168 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Location: /hw/module/1/slot/n2/node/memory
Memory at Module 1/Slot 82: 3072 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Bank 4 contains 512 MB (Standard) DIMMS (enabled)
Bank 5 contains 512 MB (Standard) DIMMS (enabled)
Location: /hw/module/1/slot/n1/node/memory
Memory at Module 1/Slot 81: 4096 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Bank 4 contains 512 MB (Standard) DIMMS (enabled)
Bank 5 contains 512 MB (Standard) DIMMS (enabled)
Bank 6 contains 512 MB (Standard) DIMMS (enabled)
Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 16: Version Fibre Channel AIC-1160, revision 2
Integral SCSI controller 12: Version QL1040B (rev. 2), differential
Integral SCSI controller 13: Version QL1040B (rev. 2), differential
Integral SCSI controller 14: Version QL1040B (rev. 2), differential
Integral SCSI controller 15: Version QL1040B (rev. 2), differential
Integral SCSI controller 17: Version Fibre Channel AIC-1160, revision 2
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Disk drive: unit 4 on SCSI controller 0 (unit 4)
Disk drive: unit 5 on SCSI controller 0 (unit 5)
CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: InfiniteReality2
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin PCI XIO board, module 1 slot 2: Revision 3
Origin FIBRE CHANNEL board, module 1 slot 6: Revision 4
Origin MSCSI board, module 1 slot 5: Revision 3
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3
Origin BASEIO board, module 1 slot 1: Revision 3
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0
PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
IOC3/IOC4 external interrupts: 1
Location: /hw/module/1/slot/n2/node/hub
HUB in Module 1/Slot 2: Revision 6 Speed 100.00 Mhz (enabled)
Location: /hw/module/1/slot/n1/node/hub
HUB in Module 1/Slot 1: Revision 6 Speed 100.00 Mhz (enabled)
Location: /hw/module/1/slot/n2/node/prom
IP27prom in Module 1/Slot n2: Revision 6.156
Location: /hw/module/1/slot/n1/node/prom
IP27prom in Module 1/Slot n1: Revision 6.156
Location: /hw/module/1/slot/io1/baseio
IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.156
here's the output of the command "/usr/gfx/gfxinfo -v"
Graphics board 0 is "KONAL" graphics.
Managed (":0.0") 1600x1200
Display has 8 channels
4 GEs (of 4), occmask = 0x0f
4MB external BEF ram, 32bit path
2 RM7 boards (of 2) 1/1/0/0
Texture Memory: 64MB/64MB/-/-
Medium pixel depth
32K cmap, 64K external gamma
brd: 80160a04 3020c06/3020c06/-/- 51bf1002
ge: 0 14832057 24731057 14231057
rm0: 15032057 15431057
4631057 2/2/2/2
4d31057 2/2/2/2/2/2/2/2
4938057 5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5/5
rm1: 15032057 15431057
4631057 1/1/1/1
4d31057 2/2/2/2/2/2/2/2
4938057 4/4/4/4/4/4/4/4/5/4/4/4/4/4/4/4/4/4/4/4
dg: 05532057
5838057 1/1/1/1
5631057 1/1/1/1/1/1/1/1
GE: NIC #: 0000.0017.9d98 (family: 0b)
Serial #: ENR945
Part #: 030-1129-002
KT: No NIC serial number available.
RM0: NIC #: 0000.0018.2607 (family: 0b)
Serial #: DMN928
Part #: 030-1054-001
TM0: NIC #: 0000.0017.5fee (family: 0b)
Serial #: EDZ158
Part #: 030-1053-001
RM1: NIC #: 0000.000c.eb45 (family: 0b)
Serial #: DMW719
Part #: 030-1054-001
TM1: NIC #: 0000.000e.6091 (family: 0b)
Serial #: DCL378
Part #: 030-1053-001
RM2: No NIC serial number available.
TM2: No NIC serial number available.
RM3: No NIC serial number available.
TM3: No NIC serial number available.
BP: No NIC serial number available.
DG: NIC #: 0000.0016.c793 (family: 0b)
Serial #: EYW549
Part #: 030-1087-001
DGOPT:No NIC serial number available.
Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
Channel 0:
Origin = (0,0)
Video Output: 1600 pixels, 1200 lines, 72.00Hz (1600x1200_72_DL.vfo)
Video Format Flags: (none)
Sync Output(s):
Composite sync on Green
Composite TTL sync on Aux 0
Using Gamma Map 0
Channel 1:
Channel's Source Size: 720 pixels, 576 lines; Origin = (440,120)
Video Output: 1200 pixels, 900 lines, 72.00Hz (1200x900_72.vfo)
Video Format Flags: (none)
Sync Output(s):
Composite sync on Green
Composite TTL sync on Aux 0
Using Gamma Map 0
