IRIX on Indy extra slow
#7
RE: IRIX on Indy extra slow
This sounds like either a hardware failure, like a dying harddisk, or timeouts during boot about missing disks, dhcp issues, or faulty DNS configuration.

IRIX 5.3 is very responsive on an Indy, even in the default installation setup with all extra services 'chkconfig'-ed.

First, try benchmarking the disk with:
Code:
diskperf -W -D -n slowindy -t 10 -c 100m testfile
The maximum SCSI transfer speed is 10 Mbyte/sec on an Indy with the standard SCSI controller WD33C93B. Typical early harddisks transfer data at 4~6 Mbyte/sec. If it is much lower, replace the disks.

Second, check '/var/adm/SYSLOG' for any problems with services, like nfs or mount daemons not able to locate disks or the network. Also have a look at '/etc/fstab' and output form the command 'chkconfig'
(This post was last modified: 09-04-2018, 06:39 AM by dexter1.)
dexter1
Administrator

Trade Count: (1)
Posts: 297
Threads: 17
Joined: May 2018
Location: The Netherlands
Find Reply
09-04-2018, 06:36 AM


Messages In This Thread
IRIX on Indy extra slow - by BitAnnihilator - 09-04-2018, 01:58 AM
RE: IRIX on Indy extra slow - by Raion - 09-04-2018, 02:49 AM
RE: IRIX on Indy extra slow - by CiaoTime - 09-04-2018, 03:55 AM
RE: IRIX on Indy extra slow - by radiance - 09-04-2018, 05:06 AM
RE: IRIX on Indy extra slow - by BitAnnihilator - 09-04-2018, 05:46 AM
RE: IRIX on Indy extra slow - by radiance - 09-04-2018, 06:33 AM
RE: IRIX on Indy extra slow - by dexter1 - 09-04-2018, 06:36 AM
RE: IRIX on Indy extra slow - by netfreak - 09-04-2018, 06:45 AM
RE: IRIX on Indy extra slow - by jan-jaap - 09-04-2018, 07:43 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)