[legodude]

Aryseche on VCF managed to track down the HP 712 firmware upgrade:
https://forum.vcfed.org/index.php?thread...h.1242144/

Anyone manage to get this installed? I've tried multiple permutations of ZuluSCSI/BlueSCSI settings without luck. The instructions just say to write to tape, then boot from tape.

mike

Code:

Step 2.  Use the "dd" command to copy the file "C7120023.frm"
                   to tape, as follows:
                      dd if=C7120023.frm of=/dev/rmt/0m bs=2k
                                            ^^^^^^^^^^^
                                       (device path dependent)
                      NOTE:  Blocksize (bs) must be = 2k
Step 1:  Install the tape you have just created into your tape
                   drive.

          Step 2.  Shutdown your system via the power switch and power back
                   on, or execute the reboot command resetting your system.

          Step 3.  When the display reads "Searching for a system to boot"
                   press [escape].  At the BOOT ADMIN prompt, type
                   <search> and press [enter] or [return] to identify
                   the tape device path.

          Step 4.  Boot from the appropriate boot path.  (You must boot
                   from the device that contains the firmware update tape.)