[fleedwood]

Two ideas
- does your X on the Linux side has tcp enabled (-listen tcp)
- if you have firewalling on the linux machine, is port 6000 allowed ?

I have "LISTEN 10.4.0.106" - which is the IP addrehttps://docs.slackware.com/howtos:window_managers:remotex_linux2linuxss on my Octane set in /etc/X11/xdm/Xaccess set, but that obviously doesn't work, where would I set "-listen tcp" - which file? I know I feel like an idiot for not being able to figure this out on my own, but on my old Indigo2 that I had at work, it was never an issue, we could telnet into any SGI on our network and it would happily open its windows on our workstations.

depends a lot on the Linux distro and how your X server is started.

Iirc you are using slackware, so this https://docs.slackware.com/howtos:window...inux2linux might help.

grepping for nolisten in /etc/X11 might also give hints where to place the -listen tcp.