[indigofan]

I’m not 100% sure about this but when you say LED I’m assuming you mean the giant logo on the front right?

I’m assuming a deskside Tezro.

I’m wondering if that’s actually related to the L1 screen.

https://irix7.com/techpubs/007-3938-003.pdf

Is your front L1 LCD lit up?  It maybe related to the “display” command in the L1 documentation.

Its claims that having the display on (L1 display) and powered up may also light the front plastic logo?


The LEDS command doesn’t really say anything about default settings, only temporary override by software to signal programmatic failure or success of a long-running operation (still a cool idea). And it only says Fuel, but I guess go ahead and try it to see if it is in fact implemented for Tezro.

Yes it is the front logo LED. Will see what I can try as the doc you sent really does not go into much details on commands available. I believe that I did try in L1 "hlp LED" with nothing coming back. I will also pull the LED and test it to see if it hasn't burned out, which would be rare as they should be rated for 50,000 hours or more of burntime.