SunFire V890 not firing up graphics
#5
RE: SunFire V890 not firing up graphics
(10-13-2022, 11:37 AM)Torkum73 Wrote:  [...]

I had a look into the Sun System Handbook and it at least confirms that the card is supported by the V890. Under "Notes" it also tells that:

"The DVI-A port does not support 1920 × 1200 × 60Hz."

...but the Sun XVR-100 Graphics Accelerator Installation Guide under "[...] Default Console Display" also tells:

"Only the Sun XVR-100 graphics accelerator HD15 video output connector can provide console output. You cannot set the DVI video connector as the console."

...so using its DVI port as console might not work at all.

This chapter also tells, how to configure the HD15 output as console output. Do these steps at least work for you?



BTW, the System Handbook also labels these cards as "ATI Radeon 7000 MAC Edition" cards. Could that mean, that all PCI graphics cards for Power Macs could be used as glass console for Sun machines, too? Not that I find this important, I'm much more happy that I can control my Suns via serial console, but still interesting.

Indigo Indy Indigo2 R10000/IMPACT O2 Octane Octane2 Origin 200=Origin 200-Origin 200=Origin 200
johnnym
Tezro

Trade Count: (0)
Posts: 268
Threads: 9
Joined: Jun 2018
Find Reply
10-22-2022, 06:07 PM


Messages In This Thread
SunFire V890 not firing up graphics - by Torkum73 - 10-13-2022, 11:37 AM
RE: SunFire V890 not firing up graphics - by vishnu - 10-16-2022, 09:15 PM
RE: SunFire V890 not firing up graphics - by Torkum73 - 10-16-2022, 09:56 PM
RE: SunFire V890 not firing up graphics - by vishnu - 10-18-2022, 12:20 AM
RE: SunFire V890 not firing up graphics - by johnnym - 10-22-2022, 06:07 PM
RE: SunFire V890 not firing up graphics - by robespierre - 10-22-2022, 07:47 PM
RE: SunFire V890 not firing up graphics - by Torkum73 - 10-27-2022, 08:24 AM
RE: SunFire V890 not firing up graphics - by johnnym - 10-23-2022, 05:20 PM
RE: SunFire V890 not firing up graphics - by vishnu - 10-23-2022, 09:59 PM
RE: SunFire V890 not firing up graphics - by johnnym - 10-24-2022, 12:43 PM
RE: SunFire V890 not firing up graphics - by robespierre - 10-24-2022, 01:35 PM
RE: SunFire V890 not firing up graphics - by johnnym - 10-26-2022, 06:52 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)