so someone said they hacked Flame to run on an o2, so makes me think it should be possible to run Inferno/Fire on Tezro (there is a license string for it btw). Anyone have any insights?
Here is the output I get from launching Inferno on my Tezro:
Code:
Tezro: /usr/discreet/inferno_2008.SP6 % inferno
---------------------------------------------------------------------------
Version 2008.SP6 P3327
Copyright © Autodesk Canada Co./Autodesk Inc.
in the USA and other countries, 1996-2008.
All rights reserved.
---------------------------------------------------------------------------
RESTRICTED RIGHTS LEGEND: This software contains confidential and
proprietary information of Autodesk Canada Co./Autodesk, Inc. and is
provided with restricted rights. Use, duplication, or disclosure by the
United States Government, and its agencies, is subject to the restrictions
set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and
Computer Software clause at DFARS 252.277-7013 or the restrictions set
forth in subparagraphs (c) (1) and (2) of the commercial Computer Software
Restricted Rights at 48 CFR 52.227-19, as applicable, or in successor
provisions or equivalent legislation in the country of use, as well as the
limitations set forth in Autodesk Canada Co./ Autodesk, Inc.'s end-user
software licence agreement. Manufacturer is Autodesk Canada Co./Autodesk,
Inc., 10 Rue Duke, Montreal, Quebec, Canada H3C 2L7.
---------------------------------------------------------------------------
Licensed under the Apache License, Version 2.0 (the "License")
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
---------------------------------------------------------------------------
CONFIG : /usr/discreet/inferno_2008.SP6/cfg/init.cfg
VIDEO CONFIG: XT-DIGVID, in format SERIAL1, out format SERIAL1
HIRES DEVICE : UI will be displayed on channel 0 (ch0).
POINTER : Trying dlwacom on port ttyd4
AUDIO : Sgi
BUILD DATE : Monday November 24 2008 14:26 EST
EXEC DATE : Mon Mar 2 00:08:56 2015 - (1425283736)
MENU : /usr/discreet/inferno_2008.SP6/menu/default.menu
POINTER : Initialising.
POINTER : Initialising.
POINTER : Initialising Mouse.
POINTER : Initialising Mouse.
Software will not operate on VPRO/B/128 hardware.
Using Stone+Wire API 2008.0 [Productswtlrel_1168] (64 bits).
Compatible S+W filesystem driver (1168) and S+W API (1168) versions detected.
Registered thread 'FastLaneServerThread' [ 65537 ]
Registered thread 'S+W Async Disk I/O' [ 65538 ]
Registered thread 'S+W Disk I/O' [ 65539 ]
Registered thread 'S+W Disk I/O' [ 65540 ]
Registered thread 'S+W Disk I/O' [ 65541 ]
Registered thread 'S+W Disk I/O' [ 65542 ]
Stone+Wire TCP port set to 7000.
Registered thread 'S+W Net Input' [ 65543 ]
Registered thread 'S+W Net Output' [ 65544 ]
Registered thread 'S+W Net Watchdog' [ 65545 ]
Registered thread 'S+W Audio Processor' [ 65546 ]
Registered thread 'S+W Audio Processor' [ 65547 ]
Registered thread 'S+W Image Converter' [ 65548 ]
Registered thread 'S+W Background I/O' [ 65549 ]
Registered thread 'S+W Background I/O' [ 65550 ]
Registered thread 'S+W Background I/O' [ 65551 ]
Registered thread 'S+W Background I/O' [ 65552 ]
Registered thread 'S+W Pipeline' [ 65553 ]
Registered thread 'S+W Pipeline' [ 65554 ]
Registered thread 'S+W Pipeline' [ 65555 ]
Registered thread 'S+W Pipeline' [ 65556 ]
Error: Software will not operate on VPRO/B/128 hardware.
Error: Software will not operate on VPRO/B/128 hardware.
Error: Software will not operate on VPRO/B/128 hardware. [1873c390]
and fire:
Code:
Tezro: /usr/discreet/fire_2008.SP1 % fire
---------------------------------------------------------------------------
Version 2008.SP1 P3274
Copyright © Autodesk Canada Co./Autodesk Inc.
in the USA and other countries, 1996-2007.
All rights reserved.
---------------------------------------------------------------------------
RESTRICTED RIGHTS LEGEND: This software contains confidential and
proprietary information of Autodesk Canada Co./Autodesk, Inc. and is
provided with restricted rights. Use, duplication, or disclosure by the
United States Government, and its agencies, is subject to the restrictions
set forth in subparagraph (c) (1) (ii) of the Rights in Technical Data and
Computer Software clause at DFARS 252.277-7013 or the restrictions set
forth in subparagraphs (c) (1) and (2) of the commercial Computer Software
Restricted Rights at 48 CFR 52.227-19, as applicable, or in successor
provisions or equivalent legislation in the country of use, as well as the
limitations set forth in Autodesk Canada Co./ Autodesk, Inc.'s end-user
software licence agreement. Manufacturer is Autodesk Canada Co./Autodesk,
Inc., 10 Rue Duke, Montreal, Quebec, Canada H3C 2L7.
---------------------------------------------------------------------------
Licensed under the Apache License, Version 2.0 (the "License")
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
---------------------------------------------------------------------------
CONFIG : /usr/discreet/fire_2008.SP1/cfg/init.cfg
VIDEO CONFIG: XT-DIGVID, in format SERIAL1, out format SERIAL1
HIRES DEVICE : UI will be displayed on vpro.
POINTER : Trying dlwacom on port ttyd4
AUDIO : Sgi
BUILD DATE : Wednesday December 19 2007 10:00 EST
EXEC DATE : Sat Feb 28 05:43:50 2015 - (1425131030)
MENU : /usr/discreet/fire_2008.SP1/menu/default.menu
POINTER : Initialising.
POINTER : Initialising.
POINTER : Initialising Mouse.
POINTER : Initialising Mouse.
Software will not operate on VPRO/B/128 hardware.
Using Stone+Wire API 2008.0 [Productswtlrel_1153] (64 bits).
Compatible S+W filesystem driver (1168) and S+W API (1153) versions detected.
Compatible SWR driver (1168) and S+W API (1153) versions detected.
Registered thread 'FastLaneServerThread' [ 65537 ]
Registered thread 'S+W Async Disk I/O' [ 65538 ]
Registered thread 'S+W Disk I/O' [ 65539 ]
Registered thread 'S+W Disk I/O' [ 65540 ]
Registered thread 'S+W Disk I/O' [ 65541 ]
Registered thread 'S+W Disk I/O' [ 65542 ]
Stone+Wire TCP port set to 7000.
Registered thread 'S+W Net Input' [ 65543 ]
Registered thread 'S+W Net Output' [ 65544 ]
Registered thread 'S+W Net Watchdog' [ 65545 ]
Registered thread 'S+W Audio Processor' [ 65546 ]
Registered thread 'S+W Audio Processor' [ 65547 ]
Registered thread 'S+W Image Converter' [ 65548 ]
Registered thread 'S+W Background I/O' [ 65549 ]
Registered thread 'S+W Background I/O' [ 65550 ]
Registered thread 'S+W Background I/O' [ 65551 ]
Registered thread 'S+W Background I/O' [ 65552 ]
Registered thread 'S+W Pipeline' [ 65553 ]
Registered thread 'S+W Pipeline' [ 65554 ]
Registered thread 'S+W Pipeline' [ 65555 ]
Registered thread 'S+W Pipeline' [ 65556 ]
Error: Software will not operate on VPRO/B/128 hardware.
Error: Software will not operate on VPRO/B/128 hardware.
Error: Software will not operate on VPRO/B/128 hardware. [186e8700]
