[jwhat]

Hi vvuk,

that is great thank you.

This confirms that we have found the right location where the CPU speed is stored.
And the acsi string marker "ip27conf" helps confirm this.

To your point about there being only 1 PROM that is true for single machines but not for a numalink'ed cluster.

Do you have more than 1 O350's ?

If so you could numalink them and see 2 x PROM being reported at boot.

Then you could pull the IO9 board and see if it now only reports 1 PROM on boot.

If this was the case then the PROM storage is on the STI chip (with the snaphat on top).

Also there is a 6.211 PROM for Fuel / O350 which is on a patch. I am not sure exactly which one it is...

>> # flash -v
>> setting default path_name to /usr/cpu/firmware
>> m001c01: Board EEPROM configuration values not available. Using PSC code.
>> m001c01: freq cpu 800000000 freq hub 200000000 mode 549baf85
>> NOTE: m001c01: prom file version 6.211 is the same as current version 6.211: prom not flashed


Cheers from Oz,


jwhat/John.