[Soy]

Hi,

Thank you for your advice.

Currently my Indy does not recognize SCISI2SD, hinv does not show.
1) CDROM Drive is live (I checked LED), so Indy's power supply connector is not issue
2) CDROM Drive is recognized as multiple drives, so SCSI bus is not issue
3) Two SCSI2SD cards are not recognized, so SCSI2SD cards are not issue (up to 25% probability of two cards are failed)
4) SCSI2SD with out SD card, "boot -f dksc..." shows SCSI2SD does not proper disk, so SCSI2SD cards are not isssue

Before doing remove PROM, I see that
"boot -f dksc(0,1,8)sashARCS dksc(0,1,7)stand/fx --x"
has error on dksc(0,1,8) is not live, so I doubt PROM.

I tried to remove PROM and putting other PROM, then I missed that a pin is gone...
I bought home-made PROMs supporting R5000, I just waiting for receiving it (will be arrived in next week).

This is current status.

--
NaN