[Soy]

Hi,

I do not understand about your explanation.
I try to format and partition with "fx" for example;
boot -f dksc(0,1,8)sashARCS

This is after the reformation by scsi2sd-utili which is used for setting ID1's SCSI2 emulation by SCSI2SD.
Then the error is happen.

Please pointing out where I misunderstand.

--
SOY

---

What I did is as follows (timeline)
1. Full-Formatting SDCard
2. Save File System Image by scsi2sd-utili on SCSI2SD board.
3. Plug SCSI2SD board to Indy
4. Boot then message like a "no path/sash"
5. Enter Command
6. Check with "hinv" for SCSI setting (ID-1)
7. Enter to fx by "boot -f dksc(0,1,8)sashARCS"
8. Meet the header volume not valid