Powered up the freebee SUN Enterprise 2 UltraSparc.
Invalid contents of IDPROM and date is 1968.. bad NVRAM I suspect.
But, still should be able to boot (if the drive is OK and there is an OS I suppose).
Code:
Sun Ultra 2 UPA/SBus (2 X UltraSPARC-II 296MHz), No Keyboard
OpenBoot 3.19, 1280 MB memory installed, Serial #16777215.
Ethernet address ff:ff:ff:ff:ff:ff, Host ID: ffffffff.
The IDPROM contents are invalid
Boot device: net File and args:
Internal loopback test -- Did not receive expected loopback packet.
Evaluating: boot
Can't open boot device
{0} ok boot disk
Boot device: /sbus/SUNW,fas@e,8800000/sd@0,0 File and args:
Can't open boot device
{0} ok
Disk in the left slot (looking at the side straight on).
I have set-defaults (still no boot)
It's been many many years since I messed with SUN, so looking for pointers.
