[dexter1]

Today was a "soldering with your kid" day and we took out our stuff to do some hardcore soldering.
So i chose to diagnose one of the broken O2 128Mb Kingston DIMM's i got from the O2 auction last year. This is the front of the Module foridentification:



I've made a photo of the affected backside through my eye-loop to show the damage:



So c14 capacitor is completely sheared off, but i am in luck, the pads are still there.
I've cleaned off the remaining capacitor debris and have to find a replacement now.

Can anyone tell me what the exact capacitor value replacement is? I've tried to measure capacitance of the other ones on the bottom row of the board, they seem to be 20 microfarad. But i also know that the capacitance measured this way is affected by the surrounding components. If i measure the capacitance on the empty pads, my measurements are bogus and the value jumps around...

Ideally i take out one of the other capacitors and measure them, but they are so damn tiny i risk losing that capacitor .