[necron2600]

I installed both Flame and Smoke on an Octane2 (I chose 'film' resolution on installing.. and note I am on a vpro V10.. not V12.. my res is always 1920x1200@70 with no issues).. on reboot I have no X11, just the initial console hardware GUI (blue background with grey console window) looping:
dgl error (access): dgl server access denied - myhostnamehere:0.0 
return -13
...
flamedgl error (access): dgl server access denied.

My monitor loses connection/sync during the attempt X start..  eventually it connects but at the default console term GUI.

I can ssh in and I run:
bash-4.4# ./gfxinfo
Graphics board 0 is "ODYSSEY" graphics.
        Unmanaged 1280x1024 
        BUZZ version B.1
        PB&J version 1
        32MB memory
                Banks: 2, CAS latency: 3
         Monitor 0 type: Unknown
        Dual Channel Display option
         Monitor 1 type: NEC 26639       Monitor 2 type: Unknown
        Xvc info not available for unmanaged boards

SYSLOG shows (after I gfxstop/gfxstart):

Jan 10 23:24:07 6B:octane xdm[1136]: Rescanning both config and servers files
Jan 10 23:24:11 4A:octane unix: WARNING: odsy: frame buffer/fullscreen accum config causes oversubscription of sdram.
Jan 10 23:24:11 3D:octane Xsgi0[3502]: odsyDefaultTTExists: SDBreadOpenDatabase failed to open '/usr/gfx/ucode/ODSY/vof/1280x1024_60p.vfo' with errno 2
Jan 10 23:24:11 3D:octane Xsgi0[3502]: odsyKernInit: ODSY_BRDMGR_CONFIG_FB failed
Jan 10 23:24:11 3D:octane Xsgi0[3502]:
Jan 10 23:24:11 2D:octane Xsgi0[3502]: Fatal server error:
Jan 10 23:24:11 2D:octane Xsgi0[3502]: no screens found


setmon does not work:

./setmon -n 1920x1200_72.vfo
Cannot open display
: Connection refused
bash-4.4# env |grep DIS
DISPLAY=:0.0


Any ideas?  This is def. something with Flame/Smoke.. and syslog is showing "accum config causes oversubscription of sdram." as a warning (V10 has less ram than v12).  How can I recover this system?

---

Well, after further review:
XDM log has:
xdm error (pid 1136): Xsgi0[3653]: odsyDefaultTTExists: SDBreadOpenDatabase failed to open '/usr/gfx/ucode/ODSY/vof/1280x1024_60p.vfo' with errno 2
Xsgi0[3653]: odsyKernInit: ODSY_BRDMGR_CONFIG_FB failed

and that file does not exist:
bash-4.4# ls -ltra /usr/gfx/ucode/ODSY/vof/1280x1024_60p.vfo
Cannot access /usr/gfx/ucode/ODSY/vof/1280x1024_60p.vfo: No such file or directory