[Irinikus]

I would like to carry out a fresh IRIX install on my Indigo2 Max Impact and the system refuses to see the CD-ROM as a CD-ROM.

This CD-ROM does work perfectly in my Indigo2 R4000!

Here's the system with the CD-ROM tray removed:



I disconnected the SCSI ribbon cable from the mother board and cleaned the connector:



I reseated the connector:



Here's a short of the terminator at the back of the CD-ROM carrier:



Here's the reassembled machine with the CD-ROM installed:



This is the hinv I get from the command monitor in the PROM:




Any help with this will be much appreciated!