[Raion]

The FTP isn't writable or public, but if you put it up somewhere temporarily I can grab it and move it there for ya

[shrek]

Yep, I can upload it somewhere - it is just over 2.6GB and is setup to hold ~36GB...

Sorry to be a bother but could you still upload it? I really want to try 6.5 in MAME. Thanks

[trekiej]

This is awesome. I hope to check this out next week.

[RodneyDavies]

Yep, I can upload it somewhere - it is just over 2.6GB and is setup to hold ~36GB...

Sorry to be a bother but could you still upload it? I really want to try 6.5 in MAME. Thanks

Sorry guys, have been caught up with work/family ... yes, I'd like to upload it but I don't have anywhere on the net that I can put 2.6GB for Raion to be able to pick it up from - has someone got a writable location I could FTP/dropbox it to?

Thanks,
Cheers,
Rod

[kirikoo]

Try with wetransfer (www.wetransfer.com), it free up to 2 GBytes, split your archive in 2 parts, that should do the job.

Kirikoo

[RodneyDavies]

Try with wetransfer (www.wetransfer.com), it free up to 2 GBytes, split your archive in 2 parts, that should do the job.

Kirikoo

Thanks Kirikoo - I will see what I can organise with Raion - the CHD compresses down to ~1.0GB so this should work well..

I run the CHD using MAME212 and this command line:

mame64 indy_4613 -gio64_gfx xl24 -cheat -hard1 irix36gbHD.6.5_p5086.6.5.22.chd -window -resolution 1280x1024

It does work with the other Indy PROMS and also the Indigo2 PROM and I would expect that once MAME is supporting the remaining RISC CPUs it should be able to be eventually upgraded to IRIX 6.5.30 ...

Cheers,
Rodney

[DeathEngine2]

I honestly forgot about this. Will definitely try this in MAME tonight.

[RodneyDavies]

I honestly forgot about this. Will definitely try this in MAME tonight.

I have given Raion the link to download it, just waiting on it to be made available here...

Cheers,
Rodney

[Raion]

It's gonna take me a few days guys. Quite busy

[lukepowo]

I'm new to this forum so I have no idea if this should even go in here.
When following the guide for running IRIX 5.3 in MAME on the IRIX Wiki, when I get to the "Obtaining Installation Tools" Screen, MAME locks up and spits out the following in the Command Prompt.

Exception at EIP=00000000057fefb6 (read_partial_sector(cdrom_file*, void*, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, bool)+0x00c6): ACCESS VIOLATION
While attempting to read memory at 0000000000000000

I'm doing this on my Test Machine which consists of a
i3 4160
8gb DDR3
RX570
I'm using MAME 2.13 with a Indy_4610 Rom. The IRIX 5.3 image is the one provided from the link at the guide here: https://wiki.irixnet.org/emulation.
Again, I am new here so sorry if this is a bad place to make this post.
Cheers, Luke.