IRIXNetwork


  1. IRIX Network Forums
  2. Emulation
  3. General Emulation

IRIX emulation is here!
#161
RE: IRIX emulation is here!
No, the Indy itself is a monocore system. I support multithreading insofar as each individual component is given its own thread/core on the host machine, but the MIPS processor emewlation in the Indy should remain monocore.

The purpose of an emewlator is to replicate the hardware in software, not upgrade it.
Insane Kitteh!

Caracal: Apple iMac (iMac14,3) :: 3.1GHz Quad-Core i7, 16GB memory, 1TB Apple SATA + 120MB Apple NVMe
Margay: SGI Indy Indy :: 100MHz R4400SC, 96MB memory, 16GB SD card
Jaguar: System76 Gazelle (gaze14) :: 2.5GHz 12-core i7-9750H, 64GB memory, 1TB Samsung Evo 970 Plus + 1TB Sandisk SATA SSD
Pallas: SGI O2 O2 :: 180MHz R5000SC, 128MB Memory, 17GB Hard drive
Lady Serena Kitty
Developurr

Trade Count: (0)
Posts: 77
Threads: 6
Joined: May 2019
Location: Live Oak, TX
Find Reply
09-18-2020, 08:27 PM
#162
RE: IRIX emulation is here!
The PROM won't allow a dual CPU config. For that you need to emulate the Onyx or Octane or origin.
I'm the system admin of this site. Private security technician, licensed locksmith, hack of a c developer and vintage computer enthusiast. 

https://contrib.irixnet.org/raion/ -- contributions and pieces that I'm working on currently. 

https://codeberg.org/SolusRaion -- Code repos I control

Technical problems should be sent my way.
Raion
Chief IRIX Officer

Trade Count: (9)
Posts: 4,252
Threads: 535
Joined: Nov 2017
Location: Eastern Virginia
Website Find Reply
09-18-2020, 08:28 PM
#163
RE: IRIX emulation is here!
Hello,

I have some trouble running it on mame.
On boot up the screen is ok, but shifted down afterwards.

Any idea ?

thank you

[Image: problem1.png]

[Image: problem2.png]
Sharp X68000 PRO HD 4MB Bluescsi
HP Kayak XA-s, Dual Pentium II 400 Mhz 512 MB Voodoo 3, 2x2TB
Sun SparcStation 5 @ 170 Mhz (TurboSparc), 96MB Ram, TGX+ graphics, 2x18GB SCSI
BeBox Dual PPC 603e @ 133 Mhz, 128 MB Ram 2GB SCSI
SGI Octane R14000 @ 600 Mhz 1GB VPro 12 128MB 8GB SCSI
NeXTCube 68040 @ 25 Mhz 64MB NeXTDimension Board 64MB 2GB SCSI
NeXTStation Color 68040 @ 25 Mhz 64 MB  2GB SCSI
NeXTStation Turbo Mono 68040 @ 33 Mhz 64MB  16GB SCSI
NeXTStation Turbo Color 68040 @ 33 Mhz 128MB 4GB SCSI
AlienWare Aurora R8 I9-9900K @ 5 Ghz 64GB 2 x GeForce RTX 2080TI 11GB SLI 1TB SSD NVMe M2 2TB HD

10Gb optical fiber Internet
octaneirix6530
Octane

Trade Count: (0)
Posts: 129
Threads: 41
Joined: Nov 2019
Location: France
Find Reply
11-01-2020, 08:33 PM
#164
RE: IRIX emulation is here!
(11-01-2020, 08:33 PM)octaneirix6530 Wrote:  Hello,

I have some trouble running it on mame.
On boot up the screen is ok, but shifted down afterwards.

Any idea ?

thank you

When the PROM screen comes up click on stop for maintenance and click on command monitor. Then put in this command without quotes "setenv monitor h" and that should fix it and get you a 1280x1024 resolution in everything.
Octane2  R14k 600MHz, V10, 2GB RAM, 73GB disk, IRIX 6.5.22
(This post was last modified: 11-04-2020, 01:28 PM by shrek.)
 shrek
It's not done until it's ogre.

Trade Count: (0)
Posts: 233
Threads: 19
Joined: Jan 2019
Location: United States
Find Reply
11-04-2020, 01:26 PM
#165
RE: IRIX emulation is here!
will try it, thank you !
Sharp X68000 PRO HD 4MB Bluescsi
HP Kayak XA-s, Dual Pentium II 400 Mhz 512 MB Voodoo 3, 2x2TB
Sun SparcStation 5 @ 170 Mhz (TurboSparc), 96MB Ram, TGX+ graphics, 2x18GB SCSI
BeBox Dual PPC 603e @ 133 Mhz, 128 MB Ram 2GB SCSI
SGI Octane R14000 @ 600 Mhz 1GB VPro 12 128MB 8GB SCSI
NeXTCube 68040 @ 25 Mhz 64MB NeXTDimension Board 64MB 2GB SCSI
NeXTStation Color 68040 @ 25 Mhz 64 MB  2GB SCSI
NeXTStation Turbo Mono 68040 @ 33 Mhz 64MB  16GB SCSI
NeXTStation Turbo Color 68040 @ 33 Mhz 128MB 4GB SCSI
AlienWare Aurora R8 I9-9900K @ 5 Ghz 64GB 2 x GeForce RTX 2080TI 11GB SLI 1TB SSD NVMe M2 2TB HD

10Gb optical fiber Internet
octaneirix6530
Octane

Trade Count: (0)
Posts: 129
Threads: 41
Joined: Nov 2019
Location: France
Find Reply
11-04-2020, 02:15 PM
#166
RE: IRIX emulation is here!
thank you, it fixed it  Smile
not that bad  Wink

Sharp X68000 PRO HD 4MB Bluescsi
HP Kayak XA-s, Dual Pentium II 400 Mhz 512 MB Voodoo 3, 2x2TB
Sun SparcStation 5 @ 170 Mhz (TurboSparc), 96MB Ram, TGX+ graphics, 2x18GB SCSI
BeBox Dual PPC 603e @ 133 Mhz, 128 MB Ram 2GB SCSI
SGI Octane R14000 @ 600 Mhz 1GB VPro 12 128MB 8GB SCSI
NeXTCube 68040 @ 25 Mhz 64MB NeXTDimension Board 64MB 2GB SCSI
NeXTStation Color 68040 @ 25 Mhz 64 MB  2GB SCSI
NeXTStation Turbo Mono 68040 @ 33 Mhz 64MB  16GB SCSI
NeXTStation Turbo Color 68040 @ 33 Mhz 128MB 4GB SCSI
AlienWare Aurora R8 I9-9900K @ 5 Ghz 64GB 2 x GeForce RTX 2080TI 11GB SLI 1TB SSD NVMe M2 2TB HD

10Gb optical fiber Internet
(This post was last modified: 11-04-2020, 05:24 PM by octaneirix6530.)
 octaneirix6530
Octane

Trade Count: (0)
Posts: 129
Threads: 41
Joined: Nov 2019
Location: France
Find Reply
11-04-2020, 05:17 PM
#167
RE: IRIX emulation is here!
Tell me, please, someone was able to configure the network: MAME + IRIS under Windows? How to set up a shared network folder in MAME + IRIS to have access to it from Windows? If possible, please share your instructions step by step. Thanks!
MrKozlovDV
O2

Trade Count: (0)
Posts: 1
Threads: 0
Joined: Nov 2020
Location: Russia
Find Reply
12-02-2020, 04:30 PM
#168
RE: IRIX emulation is here!
(12-02-2020, 04:30 PM)MrKozlovDV Wrote:  Tell me, please, someone was able to configure the network: MAME + IRIS under Windows? How to set up a shared network folder in MAME + IRIS to have access to it from Windows? If possible, please share your instructions step by step. Thanks!
Here are two links that both describe how to setup MAME networking on MS-Windows. After that, you have to configure Irix for networking just like you would on real physical hardware. I doubt any kind of 'shared folder' can be setup, I would try to stick to FTP or similar to transfer files to/from the emulated Irix instance.

[1]
http://forum.arcadecontrols.com/index.ph...msg1703641

[2]
https://forum.mamedev.org/viewtopic.php?...1481#p1481
InactiveUser45
O2

Trade Count: (0)
Posts: 26
Threads: 0
Joined: Apr 2020
Find Reply
12-09-2020, 02:27 PM
#169
RE: IRIX emulation is here!
Hello, i am new on IRIX board, i just want to share, i got poweranimator 9.0 running
on mame 226b64 on my I5 laptop.Hope you like!

[Image: poweranimator9.jpg]
O2
(This post was last modified: 12-17-2020, 10:49 PM by overlogic2011.)
 overlogic2011
O2

Trade Count: (0)
Posts: 33
Threads: 7
Joined: Dec 2020
Location: Brazil
Find Reply
12-17-2020, 10:48 PM
#170
RE: IRIX emulation is here!
Hello again! Smile

I aways had too much love for SGI and now i am getting some fun with MAME and the pre-made IRIX 6.5.22 image hosted here on IRIX ftp. I have sucessfully installed Softimage 3D 3.9.1 on that image and got it running on MAME 0226b. Bellow i have posted a screenshot from my i5 win10 laptop running SI3D with indy rom. Also have lucky getting Poweranimator 8.5, Maya 6.0.3 and Poweranimator 9.0 running but the hd space on that image is not great so i need to install one software per image. SI3D had some graphics issues, i can't get wireframes in viewport. If someone know its a SI version issue let me know.

Best Regards!

[Image: SI3-D-MAME.jpg]
O2
overlogic2011
O2

Trade Count: (0)
Posts: 33
Threads: 7
Joined: Dec 2020
Location: Brazil
Find Reply
12-20-2020, 02:59 AM
« Next Oldest | Next Newest »


Forum Jump:


Users browsing this thread: 5 Guest(s)