Fuel - Printable Version
+- IRIX Network Forums (//forums.irixnet.org)
+-- Forum: SGI/MIPS (//forums.irixnet.org/forum-3.html)
+--- Forum: Hardware/Triage/Repair (//forums.irixnet.org/forum-11.html)
+--- Thread: Fuel (/thread-789.html)
+- IRIX Network Forums (//forums.irixnet.org)
+-- Forum: SGI/MIPS (//forums.irixnet.org/forum-3.html)
+--- Forum: Hardware/Triage/Repair (//forums.irixnet.org/forum-11.html)
+--- Thread: Fuel (/thread-789.html)
Fuel - Dans34 - 12-21-2018
Those of you that are on discord have probably seen me write about this
Recently got myself a fuel and upon trying to turn it on nothing happens , no lights no fans nothing
Jumpering the PSU makes it turn on and output all the correct voltages (suggesting its not the faulty PSU)
Connecting to the L1 via a usb to serial cable doesn't seam to work , I get no output
Does anyone have any idea's ?
regards
Dan
RE: Fuel - Trippynet - 12-22-2018
What settings are you using for the serial connection? Also, make sure you're using the L1 port in the centre of the motherboard.
RE: Fuel - Dans34 - 12-22-2018
(12-22-2018, 04:22 PM)Trippynet Wrote: What settings are you using for the serial connection? Also, make sure you're using the L1 port in the centre of the motherboard.
What settings should I be using
I have tried 9600 8 N 1 & the 34800 ?
RE: Fuel - Trippynet - 12-23-2018
The Fuel needs 38400 for the L1 port. Try this with the serial port in the centre of the motherboard.
RE: Fuel - cascatino - 04-09-2019
Hello Dans34, I have the same problem in my second Fuel: PSU tested and working but no sign of life.
Did you manage to resolve the issue? I thought was something about bad signal form environment sensors locking all the workstation to prevent a breakage but I don't have the resources to even try to connect to the L1 (anyway, I would not know how to talk to her!).
Have you been able to talk to the console?