Origin 350 Failure to boot. - Printable Version

+- IRIX Network Forums (//forums.irixnet.org)
+-- Forum: SGI/MIPS (//forums.irixnet.org/forum-3.html)
+--- Forum: IRIX/Software (//forums.irixnet.org/forum-7.html)
+--- Thread: Origin 350 Failure to boot. (/thread-450.html)

---

Origin 350 Failure to boot. - IRIX - 09-21-2018

Hi everyone,

Having a small issue with my origin 350. After I Start the system in the maintenance menu, its just lists the basics of the Operating system, ending in "all rights reserved" and just waits.
I may have been playing around with the serial port settings, would this most likely be the cause? if so what is the easiest way to fix this? 
I was probably going to attempt a system recovery, but I thought I'd put it to the experts first.

Cheers,

---

RE: Origin 350 Failure to boot. - gijoe77 - 09-21-2018

serial port settings? can you go into more details?

first thing that comes to mind is doing a printenv from the PROM and just make sure nothing is mucked up there, maybe even a resetenv from PROM just for kicks (of course take a pic of printenv first)

edit: if you hook up to console do you see any output? If might be redirecting to console or something strange

---