FREE 3D Printed: Onyx Drive Bay Blanks - Printable Version

+- IRIX Network Forums (//forums.irixnet.org)
+-- Forum: SGI/MIPS (//forums.irixnet.org/forum-3.html)
+--- Forum: Hardware/Triage/Repair (//forums.irixnet.org/forum-11.html)
+---- Forum: 3D Printing/CNC/Parts Recreations (//forums.irixnet.org/forum-82.html)
+---- Thread: FREE 3D Printed: Onyx Drive Bay Blanks (/thread-2668.html)

---

3D Printed: Onyx Drive Bay Blanks - CB_HK - 01-20-2021

To solve the issue of finding enough drive blanks for my Onyx, I went ahead and created an easy-to-print blank. I originally modeled the factory drive blanks but they turned out to be rather complicated when it came to successfully printing them. This is a more primitive design, making it easier to print and straightforward to install.

Available on Thingiverse: https://www.thingiverse.com/thing:4729430

---

RE: 3D Printed: Onyx Drive Bay Blanks - Irinikus - 01-20-2021

Nice work!

---

RE: 3D Printed: Onyx Drive Bay Blanks - CB_HK - 01-20-2021

(01-20-2021, 06:06 PM)Irinikus Wrote:  Nice work!

Thanks very much! Funny how the best solution seemed to be the simplest.

---

RE: 3D Printed: Onyx Drive Bay Blanks - rbz - 01-20-2021

Nice work!

---

RE: 3D Printed: Onyx Drive Bay Blanks - GeekLucanis - 01-20-2021

I need to make one of these for my Crimson.

---

RE: 3D Printed: Onyx Drive Bay Blanks - CB_HK - 01-21-2021

(01-20-2021, 09:18 PM)GeekLucanis Wrote:  I need to make one of these for my Crimson.

I modeled the original blanks for the Crimson and ran into the same issue as with the Onyx. I’ll take a look and see if I can figure out a more primitive design that works and is easy to print. The trouble with the Crimson is that the blanks have a bending latch on them and printing those can be tricky.

I’ll revisit my previous work and see if I can’t come up with a good solution!

---

RE: 3D Printed: Onyx Drive Bay Blanks - jan-jaap - 01-21-2021

I can provide dimensions for the original blanks for a Crimson, if necessary.

---