Dual Graphics Boards for Indigo2 - Printable Version
+- IRIX Network Forums (//forums.irixnet.org)
+-- Forum: Emulation (//forums.irixnet.org/forum-47.html)
+--- Forum: General Emulation (//forums.irixnet.org/forum-43.html)
+--- Thread: Dual Graphics Boards for Indigo2 (/thread-2369.html)
+- IRIX Network Forums (//forums.irixnet.org)
+-- Forum: Emulation (//forums.irixnet.org/forum-47.html)
+--- Forum: General Emulation (//forums.irixnet.org/forum-43.html)
+--- Thread: Dual Graphics Boards for Indigo2 (/thread-2369.html)
Dual Graphics Boards for Indigo2 - shrek - 08-08-2020
While I was messing around with the Indy/Indigo2 options in MAME 0.223 I found out that under slot devices it listed multiple graphics expansion options that support the XL8 and XL24 boards. I just tested it out and had some interesting results. MAME looks like it lets you connect up to 3 graphics boards to the Indy and Indigo2 but the Indy refuses to recognize more than one, in the PROM or the OS. But the Indigo2 recognizes up to two in the PROM and OS. It shows the second desktop and everything.
Kind of a side note but the second desktop behaves strangely. It has a second toolchest and I can't drag windows from one screen to the other but the cursor goes across just fine. Is this normal? I assume it's because the boards can't share resources across multiple displays but I've never used a real SGI with multiple monitors or graphics boards.
The command to get dual XL24 graphics working:
Code:
./mame64 indigo2_4415 -gio64_gfx xl24 -gio64_exp0 xl24 -hard1 irix65.chd -window -numscreens 2RE: Dual Graphics Boards for Indigo2 - jpstewart - 08-08-2020
(08-08-2020, 04:36 PM)shrek Wrote: Kind of a side note but the second desktop behaves strangely. It has a second toolchest and I can't drag windows from one screen to the other but the cursor goes across just fine. Is this normal? I assume it's because the boards can't share resources across multiple displays but I've never used a real SGI with multiple monitors or graphics boards.
Yes, that's perfectly normal on a dual-head SGI unless you enable Xinerama (which will disable OpenGL, IIRC). There's also the OpenGL MultiPipe software, but offhand I can't remember if it's only supported on certain hardware (like Onyxes) nor do I recall how it behaves in this regard.
Maybe you could try those out in MAME and report back to us....
RE: Dual Graphics Boards for Indigo2 - 0xDEADBEEF - 05-01-2024
Indy supports dual head, you need special XL8 card that goes in between regular XL card and motherboard. So you can have XL24+specialXL8 or XL8+specialXL8
It looks like that:
oh and AFAIK you can switch between both screens in prom using setenv console G and setenv console g